Ürünler PI - Controllers & Drivers Piezo Drivers for Open-Loop Operation of Piezo Actuators
E-413 DuraAct and PICA Shear Piezo Driver
Bipolar Operation for Piezoelectric Patch Transducers and Shear Actuators
  • Peak power to 50 W
  • OEM module / benchtop device for PICA Shear actuators
  • OEM module for piezoelectric DuraAct patch transducers

Amplifier modules for PICA Shear actuators and DuraAct patch transducers

The low-noise E-413.00 (benchtop device) and E-413.OE (OEM module) amplifier modules are designed for operating piezo actuators with bipolar power supply. They can output and absorb peak currents up to 100 mA, which corresponds to the standard range of -250 to +250 V for PICA Shear actuators from PI .

The E-413.D2 version is conceived for the operation of piezoelectric DuraAct transducers and offers a peak power of 50 W in the voltage range of -100 to +400 V.

Control via PC

Alternatively, analog control is possible from the PC via D/A converter. For certain National Instruments D/A converter boards, PI offers a complete driver set compatible with the PI General Command Set (GCS) for use with NI LabVIEW software.

Analog control

E-413 piezo amplifier modules offer precision control for piezo shear and bending actuators in static and dynamic operation. The output voltage can be either set exactly with an external offset potentiometer (not in the scope of delivery) or controlled via an analog input signal that is amplified by a factor of 50.

A stabilized voltage of 24 V is sufficient to operate the E-413. An integrated DC/DC converter supplies the piezo voltage as well as all other necessary internal voltages. All inputs and outputs are routed via the 32-pin connector strip.

Scope of delivery

OEM modules: Connector strip for 32-pin main connector for installing into the customer's housing. Printed documentation.

Benchtop device: Power adapter with power cord and adapter. Connecting cables for the piezo actuator. Adapter cables for control signal input SMB/BNC. Printed documentation.

E-413.00
E-413.OE
E-413.D2

Function

Power amplifier for PICA Shear piezo actuators, benchtop device

Power amplifier for PICA Shear piezo actuators, OEM module

Power amplifier for piezoceramic DuraAct patch transducers, OEM module

Amplifier
E-413.00
E-413.OE
E-413.D2

Input voltage range

-5 to 5 V

-5 to 5 V

-2 to 8 V

Output voltage range

-250 to 250 V

-250 to 250 V

-100 to 400 V

Amplifier channels

1

1

1

Peak output power

50 W (<3 ms)

50 W (<3 ms)

50 W (<5 ms)

Average output power

<12 W (>3 ms)

<12 W (>3 ms)

<6 W (>5 ms)

Peak current

100 mA (<3 ms)

100 mA (<3 ms)

100 mA (<5 ms)

Average output current

24 mA (>3 ms)

24 mA (>3 ms)

12 mA (>5 ms)

Current limitation

Short-circuit proof

Short-circuit proof

Short-circuit proof

Voltage gain

50 ±0.1

50 ±0.1

50 ±0.1

Ripple, noise, <10 kHz

<100 mVpp (100 nF load)

<100 mVpp (100 nF load)

<100 mVpp (100 nF load)

Amplifier resolution

<10 mV

<10 mV

<10 mV

Input impedance

100 kΩ

100 kΩ

100 kΩ

Interfaces and operation
E-413.00
E-413.OE
E-413.D2

Piezo connection

Conec sub-D 5W1 with HV contact (rear)

DIN 41612, 32-pin (rear)

DIN 41612, 32-pin (rear)

Analog input

SMB connector (rear)

DIN 41612, 32-pin (rear)

DIN 41612, 32-pin (rear)

Miscellaneous
E-413.00
E-413.OE
E-413.D2

Operating temperature range

5 to 50 °C (above 40 °C, power derated)

5 to 50 °C (above 40 °C, power derated)

5 to 50 °C (above 40 °C, power derated)

Dimensions

220 mm × 105 mm × 54 mm

14 HP / 3 RU

7 HP / 3 RU

Mass

1.14 kg

0.8 kg

0.4 kg

Operating voltage

24 V / 2 A

24 V / 2 A

24 V / 1 A

Power consumption

48 W

48 W

24 W

Veri Sayfası
Veri Sayfası
Datasheet E-413
Versiyon / Tarih
2018-09-19
pdf - 257 KB
Dokümantasyon
Dokümantasyon
Short Instruction PZ300
Housed Analog Piezo Electronics E-4xx, E-5xx, E-6xx, E-8xx
Versiyon / Tarih
1.1.0 04/2021
pdf - 1 MB
Dokümantasyon
User Manual PZ199
E-413 Piezo Amplifier for PICA Shear Actuators and DuraAct Piezoceramic Transducers
Versiyon / Tarih
2008-01-18
pdf - 430 KB
E-413.00
Piezo amplifier for PICA Shear actuators, -250 to +250 V, benchtop device
E-413.OE
Piezo amplifier for PICA Shear actuators, -250 to +250 V, OEM module
E-413.D2
Piezo amplifier for piezoceramic DuraAct patch transducers, -100 to +400 V, OEM module
Geçmişin gücüyle geleceğe yön verin.
İletişim
Nano Dünya Mak. San. Tic. Ltd. Şti.
Parseller Mah. Gündoğan Sok. No:8/A
Ümraniye/İstanbul

02166140039
info@nanodunya.com.tr
Copyright © 2024 by Nano Dünya. Tüm Hakları Saklıdır
x
Teklif Listesi
Teklif listeniz şu anda boş.
x
Döküman Talebi
İndirme listeniz şu anda boş.
0 0 Whatsapp