Ürünler PI - Nanopositioning Piezo Flexure Stages Multi-Axis Piezo Flexure Stages
P-562.6CD PIMars 6-Axis Nanopositioning Stage
High-Precision Nanopositioner with 6 Degrees of Freedom
  • 6 motion axes: 3 × linear, 3 × rotational
  • Travel ranges to 200 µm linear and to 1 mrad tip/tilt angle
  • Parallel kinematics for faster response times and higher multi-axis accuracy
  • Highest linearity due to capacitive sensors
  • Zero-play, high-precision flexure guide system
  • Excellent scanning flatness
  • Clear aperture 66 mm × 66 mm
  • Outstanding lifetime due to PICMA® piezo actuators
  • UHV-compatible to 10-9 hPa

Application fields

  • Scanning microscopy
  • Super-resolution microscopy
  • Biotechnology
  • Mask/wafer positioning
  • Sample positioning
  • Interferometry
  • Metrology

Subnanometer resolution with capacitive sensors

Capacitive sensors measure with subnanometer resolution without contacting. They guarantee excellent linearity of motion, long-term stability, and a bandwidth in the kHz range.

Automatic configuration and fast component exchange

Mechanics and controllers can be combined as required and exchanged quickly. All servo and linearization parameters are stored in the ID chip of the D-sub connector of the mechanics. The autocalibration function of the digital controllers uses this data each time the controller is switched on.

Suitable for sophisticated vacuum applications

All components used in the piezo systems are excellently suited for use in vacuum. No lubricant or grease is necessary for operating. Polymer-free piezo systems allow particularly low outgas rates.

Outstanding lifetime thanks to PICMA® piezo actuators

The patented PICMA® piezo actuators are all-ceramic insulated. This protects them against humidity and failure resulting from an increase in leakage current. PICMA® actuators offer an up to ten times longer lifetime than conventional polymer-insulated actuators. 100 billion cycles without a single failure are proven.

High guiding accuracy due to zero-play flexure guides

Flexure guides are free of maintenance, friction, and wear, and do not require lubrication. Their stiffness allows high load capacity and they are insensitive to shock and vibration. They are 100 % vacuum compatible and work in a wide temperature range.

High tracking accuracy in the nanometer range due to parallel position measuring

All degrees of freedom are measured against a single fixed reference. Undesired crosstalk between axes can be actively compensated (active guiding) in real time (depending on the bandwidth). High tracking accuracy is achieved in the nanometer range even in dynamic operation.

P-562.6CD

Unit

Tolerance

Active axes

X, Y, Z, θX, θY, θZ

Motion and positioning

Integrated sensor

Capacitive

Travel range in X, Y, Z, closed loop

200

µm

Tip/tilt angle in θX, θY, θZ, closed loop

±0.5

mrad

Resolution in X, Y, Z, closed loop

1

nm

typ.

Resolution in θX, θY, θZ, closed loop

0.1

µrad

typ.

Linearity error in X, Y, Z

0.01

%

typ.

Linearity error θX, θY, θZ

0.1

%

typ.

Repeatability in X / Y / Z

±2 / ±2 / ±3

nm

typ.

Repeatability θX / θY / θZ

±0.1 / ±0.1 / ±0.15

µrad

typ.

Flatness

<15

nm

typ.

Mechanical properties

Resonant frequency in X / Y / Z, no load

110 / 110 / 190

Hz

±20 %

Load capacity*

5

kg

max.

Drive properties

Ceramic type

PICMA®

Electrical capacitance in X / Y / Z

7.4 / 7.4 / 14.8

µF

±20 %

Miscellaneous

ID chip functionality

Yes

Operating temperature range

-20 to 80

°C

Material

Aluminum

Mass

1.45

kg

±5 %

Cable length

1.5

m

±10 mm

Sensor/voltage connection

2 × D-sub 25W3 (m)

Recommended electronics

E-712

3D Modeller
3D Modeller
P-562.6CD 3-D model
Versiyon / Tarih

zip - 809 KB
Veri Sayfası
Veri Sayfası
Datasheet P-562.6CD
Versiyon / Tarih
2019-11-15
pdf - 378 KB
Dokümantasyon
Dokümantasyon
Short Instructions PZ240
Piezo Positioning Systems: P-5xx / P-6xx / P-7xx
Versiyon / Tarih
6.1.0 10/2019
pdf - 1 MB
Dokümantasyon
Technical Note P500T0002
Unpacking and Packing P-5xx Positioners
Versiyon / Tarih
2019-03-04
pdf - 448 KB
Dokümantasyon
User Manual PZ297
P-562.6CD Nanopositioner
Versiyon / Tarih
1.0.0 2019-12-16
pdf - 1 MB
P-562.6CD
PIMars 6-axis nanopositioner, 200 µm, 1 mrad, parallel metrology
Geçmişin gücüyle geleceğe yön verin.
İletişim
Nano Dünya Mak. San. Tic. Ltd. Şti.
Parseller Mah. Gündoğan Sok. No:8/A
Ümraniye/İstanbul

02166140039
info@nanodunya.com.tr
Copyright © 2024 by Nano Dünya. Tüm Hakları Saklıdır
x
Teklif Listesi
Teklif listeniz şu anda boş.
x
Döküman Talebi
İndirme listeniz şu anda boş.
0 0 Whatsapp