Ürünler PI - Controllers & Drivers Motion Controllers & Drivers for Linear, Torque, Stepper & DC Servo Motors
C-891.130300 PIMag® Motion Controller for Magnetic Direct Drives
1 Axis, for 3-Phase Linear Motors
  • Output current 5 A
  • 20-kHz control bandwidth
  • Protection against overload, overcurrent, overtemperature
  • Digital inputs and outputs for trigger and stop function
  • USB interface for commanding and configuration

Digital motion controller for PIMag® linear motors

1 motor channel, 1 sensor channel. For three-phase linear motors with currents of 5 A per phase. Sine-commutated operation, field-oriented current control. Automatic commutation angles adjustment. PID controller for position and velocity.

Extensive functionality

Protection for motor and motor driver due to protective shutdown and current limitation. Motor stop via external switch. Data recorder, wave generator, macros. Extensive software support, e.g., for NI LabVIEW, C, C++, MATLAB, Python. PIMikroMove user software.

Encoder inputs

Differential signal transmission for digital (A/B) or analog (sin/cos) encoder signals. Supports BiSS interface for absolute encoders. TTL inputs for limit and reference switches.

Interfaces

USB and RS-232 for commanding. Digital inputs and outputs for automation. Analog input for recording an external sensor signal.

C-891.130300

Function

PIMag® motion controller for 3-phase linear motors

Motor channels

1

Sensor channels

1

Supported functions

Point-to-point motion. Data recorder. Wave generator. Macros. Automatic adjustment of the commutation angle for 3-phase linear motors.

Safety features

Motor stop via external switch. Overload protection of the motor driver. Overheat protection of the motor. Overcurrent protection of the system.

Motion and control

C-891.130300

Controller type

PID controller for position and velocity, parameter changing during operation

Servo frequency

20 kHz

Profile Generator

Trapezoidal velocity profile, setting of maximum velocity and acceleration

Encoder input

Sin/cos, A/B (TTL, differential), BiSS interface for absolute encoder

Reference and limit switches

TTL

Electrical properties

C-891.130300

Intermediate circuit voltage

48 V or 24 V; depending on operating voltage used

Max. average output current, amplitude of sine

5 A

Peak output current, amplitude of sine

10 A

Max. average output current, RMS

3.6 A

Peak output current, RMS

7.2 A

Interfaces and operation

C-891.130300

Communication interfaces

USB, RS-232

Motor connector

HD D-sub 26 (f)

Sensor connector

D-sub 15 (m)

I/O lines

HD D-sub 15 (f):

4 x digital input, 4 x digital output (TTL)

LEMO EPG.00.302.NLN:

Analog input -10 to 10 V

Command set

PI General Command Set (GCS)

User software

PIMikroMove

Application programming interfaces

API for C / C++ / C# / VB.NET / MATLAB / Python, drivers for NI LabVIEW

Miscellaneous

C-891.130300

Operating voltage

48 V DC or 24 V DC

Max. current consumption

10 A (load dependent)

Power adapter 48 V

Not included in the scope of delivery; must be supplied by the user

Power adapter 24 V

Included in the scope of delivery:

Desktop power adapter, primary: 100-240 V AC, secondary: 24 V DC 120 W M12

Operating temperature range

5 to 40 °C

Mass

1.0 kg

Dimensions

190 mm × 83 mm × 110 mm

(with rubber feet and connection for supply voltage: 206 mm x 83 mm x 112 mm)

Ask about customized versions.

Veri Sayfası
Veri Sayfası
Datasheet C-891.130300
Versiyon / Tarih
2020-05-20
pdf - 187 KB
Dokümantasyon
Dokümantasyon
User Manual MS251
C-891 PIMag® Motion Controller
Versiyon / Tarih
2020-06-30
pdf - 4 MB
Genel Yazılım Dokümantasyonu
Genel Yazılım Dokümantasyonu
User Manual A000T0028
Updating PI Software with PIUpdateFinder
Versiyon / Tarih
2020-05-20
pdf - 482 KB
Genel Yazılım Dokümantasyonu
Software Manual SM146
GCS Array Data Format
Versiyon / Tarih
1.2.1
pdf - 153 KB
Genel Yazılım Dokümantasyonu
Software Manual SM148
PIMikroMove
Versiyon / Tarih
2.14.1 2022-02-28
pdf - 4 MB
Genel Yazılım Dokümantasyonu
Software Manual SM151E
PI GCS2 DLL
Versiyon / Tarih
2.10.0 2019-08-26
pdf - 1 MB
Genel Yazılım Dokümantasyonu
Software Manual SM155
PI MATLAB Driver GCS 2.0
Versiyon / Tarih
1.2.0 2019-03-22
pdf - 1 MB
Genel Yazılım Dokümantasyonu
Software Manual SM156
PIStages3Editor for editing the PIStages3 database
Versiyon / Tarih
2.1.0 2020-08-03
pdf - 2 MB
Genel Yazılım Dokümantasyonu
User Manual A000T0067
Information on the PIStages3 database. What must be considered when changing from PIStages2 to PIStages3.
Versiyon / Tarih
2020-01-13
pdf - 543 KB
Genel Yazılım Dokümantasyonu
Software Manual SM157
PIPython - Programming PI Controllers with Python
Versiyon / Tarih
2021-08-17
pdf - 866 KB
Genel Yazılım Dokümantasyonu
User Manual A000T0075
Implementing a C-887 PI Controller in TwinCAT 3.1 for Motion and Coordinate System Activation
Versiyon / Tarih
2020-02-24
pdf - 1 MB
Genel Yazılım Dokümantasyonu
Software Manual SM159
PIFRF-Analyzer
Versiyon / Tarih
2021-09-07
pdf - 923 KB
Yazılım Dosyası
Yazılım Dosyası
PI Software Suite C-990.CD1
Versiyon / Tarih
2.6.1.0, 2023-08
zip - 645 MB
Yazılım Dosyası
C-990.CD1 Releasenews
Versiyon / Tarih
2.6.1.0, 2023-08
pdf - 311 KB
C-891.130300
PIMag® motion controller for magnetic direct drives, 1 axis, 24/48 V, 5 A, USB and RS-232 interface
Geçmişin gücüyle geleceğe yön verin.
İletişim
Nano Dünya Mak. San. Tic. Ltd. Şti.
Parseller Mah. Gündoğan Sok. No:8/A
Ümraniye/İstanbul

02166140039
info@nanodunya.com.tr
Copyright © 2024 by Nano Dünya. Tüm Hakları Saklıdır
x
Teklif Listesi
Teklif listeniz şu anda boş.
x
Döküman Talebi
İndirme listeniz şu anda boş.
0 0 Whatsapp