Ürünler PI - Controllers & Drivers Motion Controllers & Drivers for Linear, Torque, Stepper & DC Servo Motors
G-910.RC01 • RC03 ACS Driver Module for Low Power Requirement
For 2 Drive Axes with AC Servo Motor, DC Motor, Voice Coil Motor, Stepper Motor
  • Universal driver module as benchtop device or control cabinet module
  • Directly compatible with positioners from PI
  • For AC servo motors / brushless DC motors, brushed DC motors, voice coil motors, stepper motors
  • Encoder inputs for incremental and absolute-measuring encoders
  • Output power to 480 W at 60 V
  • Communication via EtherCAT

Universal driver module

ACS driver module for the operation of different motor and encoder types, can be configured for a variety of applications. 2 axes, 5 A continuous current per axis possible. 2 motor brakes via PWM brake driver, reduced heat generation of the motor brake. Motion profiles are generated by an external motion controller, e.g. G-910.RC02, and received via EtherCAT. The motion controller must be ordered separately.

Encoder

Supports incremental encoders (sine/cosine or RS-422) and absolute encoders (EnDat 2.2 & 2.1, Smart-Abs, Panasonic, BiSS-A/B/C (SSI)). Depending on the application, the encoders can respectively be led to the motor interface or the separate sensor interface.

Communication

EtherCAT interface for the integration into an ACS EtherCAT network. Commanding, for example, via the G-910.RC02 motion controller into which an SPiiPlusEC controller + EtherCAT master from ACS is integrated, among others.

Housing types

Available as a benchtop device or a control cabinet module, adapter for mounting on TH-35 top hat rail or on mounting plate is included in the scope of delivery for the control cabinet version.

I/O lines

The digital inputs and outputs can be flexibly configured. For the evaluation of reference switches, digital inputs can alternatively be led to the motor connectors. Depending on the application, the inputs for the limit and reference switches can be configured for 5 V or 24 V and also as PNP or NPN inputs. Position synchronous trigger signals with up to 10Mhz output frequency make a precise process control at high travel velocities possible (position event generator – PEG).

Configuration

If the types of positioners used are specified when ordering, all connectors of the G-910.RC01 / G-910.RC03 are suitably preconfigured at delivery. The default configuration, without positioner-specific adjustments, is detailed in the specifications. For subsequent adjustments, please contact our service department.

G-910.RC0102100 / G-910.RC0102200 / G-910.RC0302200

Function

ACS UDMnt driver module, with connectors for positioners from PI

Version

G-910.RC01xxxxx: Benchtop device

G-910.RC03xxxxx: Control cabinet module

Motor types

2 and 3-phase AC servo motors / brushless DC motors, brushed DC motors, voice coil motors, stepper motors

Number of drive axes

2

Motion and control

G-910.RC0102100 / G-910.RC0102200 / G-910.RC0302200

Controller type

Cascading PIV controller structure with velocity and acceleration feedforward control

Sampling rate current control

20 kHz

Control algorithms

Gantry control, dual-loop control

Encoder

1 × per axis, supported types:

Incremental: 1Vss, RS-422

Absolute: EnDat 2.2 & 2.1, Smart-Abs, Panasonic, BiSS-A/B/C (SSI)

Limit switches

2 × per axis

Default: 5 V sinking (NPN)

Optional configuration: 24 V; sourcing (PNP)

Reference switch

Default: 1 × per axis, 5 V sinking (NPN)

Optional configuration: 24 V; sourcing (PNP); use as digital multipurpose inputs on HD-D-sub 15 (f)

Motor brake

1 × per axis

Integrated PWM brake driver with current reduction for a reduced heating up of the brake

Electrical properties

G-910.RC0102100

G-910.RC0102200

G-910.RC0302200

Output voltage (intermediate circuit)*

24 V

48 V

12 V to 60 V

Max. output power (intermediate circuit)*

120 W per axis

280 W per axis

480 W per axis (at 60 V DC, 8 A input current)

Current limitation per motor phase (amplitude of sine), continuous/peak (max. 1 s)

5 A / 9.5 A peak**

5 A / 9.5 A peak**

5 A continuous / 10 A peak

Interfaces and operation

G-910.RC0102100 / G-910.RC0102200 / G-910.RC0302200

Motor connector

2 × HD D-sub 26 (f)

Sensor connector

2 × D-sub 15 (m) or 2 × via the motor connectors

Default factory configuration at delivery:

Digital incremental encoder (RS-422) or absolute encoder on motor connector

Incremental encoder 1 Vss on D-sub 15 (m)

Default factory configuration at delivery:

Digital incremental encoder (RS-422) or absolute encoder on D-sub 15 (m)

Digital I/O lines

HD D-sub 15 (f):

2 × outputs PNP 24 V source; also control the brake drivers at the motor connectors

Default for inputs:

2 × PNP 24 V source on HD D-sub 15 (f); in addition 2 × NPN 5 V sinking for reference switches on the motor connectors

Optional configuration for inputs:

4 × PNP 24 V source on HD D-sub 15 (f)

Analog I/O lines

HD D-sub 15 (m):

2 differential analog inputs: ±10 V, 12-bit

1 differential analog output: ±10 V, 10 bit

Outputs for position event generator (PEG)

Parallel on HD D-sub 15 (m) and HD D-sub 15 (f):

2 differential outputs (RS-422) for pulses at programmable positions, pulse width 26 ns to 1.75 ms, max. 10 MHz; only possible with incremental encoder

Communication interfaces

EtherCAT

Miscellaneous

G-910.RC0102100

G-910.RC0102200

G-910.RC0302200

Operating voltage intermediate circuit

24 V DC from external power adapter, power adapter with 24 V DC (120 W) included in the scope of delivery

48 V DC from external power adapter, power adapter with 48 V DC (280 W) included in the scope of delivery

12 V to 60 V DC from external power adapter, not included in the scope of delivery

Operating voltage logic

24 V DC from external power adapter, power adapter with 24 V DC (120 W) included in the scope of delivery

24 V DC from external power adapter, power adapter with 24 V DC (120 W) included in the scope of delivery

24 V DC from external power adapter, not included in the scope of delivery

Max. current consumption intermediate circuit

5 A*

5 A*

<8.6 A

Max. current consumption logic

0.9 A

0.9 A

0.9 A

Operating temperature range

5 °C to 40 °C (temperature protection switches off at excessively high temperatures)

5 °C to 40 °C (temperature protection switches off at excessively high temperatures)

5 °C to 40 °C (temperature protection switches off at excessively high temperatures)

Mass

1.55 kg

1.55 kg

1.4 kg

Dimensions

187.3 mm × 64 mm × 294.1 mm

187.3 mm × 64 mm × 294.1 mm

186.4 mm × 56 mm × 295.2 mm

* Depending on the power adapter used

** Permissible maximum value is not reached with the supplied power adapter

3D Modeller
3D Modeller
3-D model G-910.RC01
Versiyon / Tarih
2021-02-05
zip - 2 MB
3D Modeller
3-D model G-910.RC03
Versiyon / Tarih
2021-02-05
zip - 3 MB
Veri Sayfası
Veri Sayfası
Datasheet G-910.RC01 • RC03
Versiyon / Tarih
2022-09-14
pdf - 299 KB
Dokümantasyon
Dokümantasyon
User Manual G910M0003
G-910.RC0302200 ACS driver module, 2 axes, intermediate circuit voltage 12 to 60 V DC, directly compatible with positioners from PI
Versiyon / Tarih
2022-05-04
pdf - 3 MB
Dokümantasyon
User Manual G910M0002
G-910.RC0102100 and G-910.RC0102200 ACS drive modules with 24 V and 48 V intermediate circuit voltage and interfaces for PI positioners
Versiyon / Tarih
2020-06-30
pdf - 2 MB
G-910.RC0102100
ACS driver module, 2 axes, intermediate circuit voltage 24 V DC, logic voltage 24 V DC, benchtop device, integrated ACS UDMnt2B220U2N power amplifier
G-910.RC0102200
ACS driver module, 2 axes, intermediate circuit voltage 48 V DC, logic voltage 24 V DC, benchtop device, integrated ACS UDMnt2B220U2N power amplifier
G-910.RC0302200
ACS driver module, 2 axes, intermediate circuit voltage 12 to 60 V DC, logic voltage 24 V DC, control cabinet module for screw-on or top hat rail mounting, integrated ACS UDMnt2B220U2N power amplifier
Geçmişin gücüyle geleceğe yön verin.
İletişim
Nano Dünya Mak. San. Tic. Ltd. Şti.
Parseller Mah. Gündoğan Sok. No:8/A
Ümraniye/İstanbul

02166140039
info@nanodunya.com.tr
Copyright © 2024 by Nano Dünya. Tüm Hakları Saklıdır
x
Teklif Listesi
Teklif listeniz şu anda boş.
x
Döküman Talebi
İndirme listeniz şu anda boş.
0 0 Whatsapp