Ürünler PI - Hexapods Positioning Hexapods for Loads up to 250 kg
H-825 6-Axis Hexapod
Compact Design, for Loads to 30 kg
  • Load capacity to 30 kg, self-locking
  • Travel ranges to ±27.5 mm, rotation range to ±11.5°
  • Minimum incremental motion to 0.25 µm in X, Y, and Z
  • Repeatability to ±0.1 µm / ±2 µrad
  • BLDC motors and absolute encoders

Parallel-kinematic design for six degrees of freedom, making it significantly more compact and stiff than serial-kinematic systems, higher dynamics, no moved cables: Higher reliability, reduced friction.

Brushless DC Motor (BLDC)

Brushless DC motors are particularly suitable for high rotational speeds. They can be controlled very accurately and ensure high precision. Because they dispense with sliding contacts, they run smoothly, are wear-free and therefore achieve a long lifetime.

Absolute Encoder

Absolute encoders supply explicit position information that enables immediate determination of the position. Therefore, no referencing is necessary when switching on and this increases efficiency and safety during operation.

PI Hexapod Simulation Tool

The simulation software simulates the limits of the workspace and load capacity of a hexapod. Therefore, even before purchasing, you can check whether a particular hexapod model can handle the loads, forces, and torques occurring in an application. For this purpose, the simulation tool takes the position and motion of the hexapod as well as the pivot point and several reference coordinate systems into account.

Application fields

Industry and research. For microassembly, biotechnology, semiconductor manufacturing, optical alignment.

Motion H-825.D2A H-825.G2A Tolerance
Active axes X Y Z θX θY θZ X Y Z θX θY θZ  
Travel range in X ± 27.5 mm ± 27.5 mm  
Travel range in Y ± 25 mm ± 25 mm  
Travel range in Z ± 14 mm ± 14 mm  
Rotation range in θX ± 11.5 ° ± 11.5 °  
Rotation range in θY ± 10.5 ° ± 10.5 °  
Rotation range in θZ ± 19 ° ± 19 °  
Maximum velocity in X 25 mm/s 2.5 mm/s  
Maximum velocity in Y 25 mm/s 2.5 mm/s  
Maximum velocity in Z 25 mm/s 2.5 mm/s  
Maximum angular velocity in θX 270 mrad/s 27 mrad/s  
Maximum angular velocity in θY 270 mrad/s 27 mrad/s  
Maximum angular velocity in θZ 270 mrad/s 27 mrad/s  
Typical velocity in X 20 mm/s 2 mm/s  
Typical velocity in Y 20 mm/s 2 mm/s  
Typical velocity in Z 20 mm/s 2 mm/s  
Typical angular velocity in θX 55 mrad/s 5.5 mrad/s  
Typical angular velocity in θY 55 mrad/s 5.5 mrad/s  
Typical angular velocity in θZ 55 mrad/s 5.5 mrad/s  
Positioning H-825.D2A H-825.G2A Tolerance
Integrated sensor Absolute rotary encoder, multi-turn Absolute rotary encoder, multi-turn  
Unidirectional repeatability in X ± 0.5 µm ± 0.5 µm typ.
Unidirectional repeatability in Y ± 0.5 µm ± 0.25 µm typ.
Unidirectional repeatability in Z ± 0.15 µm ± 0.1 µm typ.
Unidirectional repeatability in θX ± 2 µrad ± 2 µrad typ.
Unidirectional repeatability in θY ± 1.5 µrad ± 2 µrad typ.
Unidirectional repeatability in θZ ± 3 µrad ± 2.5 µrad typ.
Minimum incremental motion in X 1 µm 0.3 µm typ.
Minimum incremental motion in Y 1 µm 0.3 µm typ.
Minimum incremental motion in Z 0.5 µm 0.25 µm typ.
Minimum incremental motion in θX 7 µrad 3.5 µrad typ.
Minimum incremental motion in θY 7 µrad 3.5 µrad typ.
Minimum incremental motion in θZ 12 µrad 4 µrad typ.
Backlash in X 1.5 µm 3 µm typ.
Backlash in Y 1.5 µm 3 µm typ.
Backlash in Z 1 µm 1 µm typ.
Backlash in θX 15 µrad 20 µrad typ.
Backlash in θY 15 µrad 20 µrad typ.
Backlash in θZ 25 µrad 25 µrad typ.
Drive Properties H-825.D2A H-825.G2A Tolerance
Drive type Brushless DC motor Brushless DC gear motor  
Mechanical Properties H-825.D2A H-825.G2A Tolerance
Stiffness in X 1.7 N/µm 1.7 N/µm  
Stiffness in Y 1.7 N/µm 1.7 N/µm  
Stiffness in Z 7 N/µm 7 N/µm  
Maximum holding force, base plate in any orientation 5 N 150 N  
Maximum holding force, base plate horizontal 10 N 300 N  
Maximum load capacity, base plate in any orientation 7.5 kg 15 kg  
Maximum load capacity, base plate horizontal 15 kg 30 kg  
Overall mass 10 kg 10 kg  
Material

Aluminum

Aluminum

 
Miscellaneous H-825.D2A H-825.G2A Tolerance
Connector for supply voltage M12 4-pin (m) M12 4-pin (m)  
Recommended controllers / drivers

C-887.5x

C-887.5x

 
Operating temperature range -10 to 50 °C -10 to 50 °C  
Connector for data transmission HD D-sub 78-pin (m) HD D-sub 78-pin (m)  

Technical data specified at 22±3 °C.

The maximum travel ranges of the individual coordinates (X, Y, Z, θX, θY, θZ) are interdependent. The data for each axis shows its maximum travel range when all other axes are in the zero position of the nominal travel range and the default coordinate system is in use, or rather when the pivot point is set to 0,0,0.

Connecting cables are not included in the scope of delivery and must be ordered separately.

Ask about customized versions.

3D Modeller
3D Modeller
H-825.x2x 3-D model
Versiyon / Tarih

zip - 3 MB
Veri Sayfası
Veri Sayfası
Datasheet H-825
Versiyon / Tarih
2022-09-12
pdf - 2 MB
Dokümantasyon
Dokümantasyon
Short Instructions MS247EK
Hexapod Systems: H-xxx Hexapod with C-887.5xx Controller
Versiyon / Tarih
2.0.0 06/2020
pdf - 2 MB
Dokümantasyon
User Manual MS250
H-825 Compact Hexapod Microrobot
Versiyon / Tarih
1.4.0 2023-01-12
pdf - 3 MB
Ürün Notu
Ürün Notu
Product Change Notification Motor Driven Products
Versiyon / Tarih
2021-04-19
pdf - 917 KB
Yazılım Dosyası
Yazılım Dosyası
Hexapod Simulation Tool
Versiyon / Tarih
2022-01-26
zip - 18 MB
Teknik İncelemeler
Teknik İncelemeler
Industrial Safety Device for Hexapods
How to Connect a Safety Light Barrier to a Hexapod System
Versiyon / Tarih
WP4025E 2020-02
pdf - 1 MB
H-825.D2A
Compact hexapod microrobot, brushless DC motor, absolute encoder, 15 kg load capacity, 25 mm/s velocity. Connecting cables are not included in the scope of delivery and must be ordered separately.
H-825.G2A
Compact hexapod microrobot, brushless DC gear motor, absolute encoder, 30 kg load capacity, 2.5 mm/s velocity. Connecting cables are not included in the scope of delivery and must be ordered separately.
Geçmişin gücüyle geleceğe yön verin.
İletişim
Nano Dünya Mak. San. Tic. Ltd. Şti.
Parseller Mah. Gündoğan Sok. No:8/A
Ümraniye/İstanbul

02166140039
info@nanodunya.com.tr
Copyright © 2024 by Nano Dünya. Tüm Hakları Saklıdır
x
Teklif Listesi
Teklif listeniz şu anda boş.
x
Döküman Talebi
İndirme listeniz şu anda boş.
0 0 Whatsapp