The patented PICMA® piezo actuators are all-ceramic insulated. This protects them against humidity and failure resulting from an increase in leakage current. PICMA® actuators offer an up to ten times longer lifetime than conventional polymer-insulated actuators. 100 billion cycles without a single failure are proven.
Capacitive sensors measure with subnanometer resolution without contacting. They guarantee excellent linearity of motion, long-term stability, and a bandwidth in the kHz range.
Flexure guides are free of maintenance, friction, and wear, and do not require lubrication. Their stiffness allows high load capacity and they are insensitive to shock and vibration. They work in a wide temperature range.
Mechanics and controllers can be combined as required and exchanged quickly. All servo and linearization parameters are stored in the ID chip of the D-sub connector of the mechanics. The autocalibration function of the digital controllers uses this data each time the controller is switched on.
Motion is measured directly at the motion platform without any influence from the drive or guide elements. This allows optimum repeatability, outstanding stability, and stiff, fast-responding control.
In a parallel-kinematic multi-axis system, all actuators act on a common platform. The minimum mass inertia and the identical design of all axes allow fast, dynamic, and nevertheless precision motion.
| Motion | P-734.2CD | P-734.2CL | Tolerance |
|---|---|---|---|
| Active axes | X Y | X Y | |
| Travel range in X | 100 µm | 100 µm | |
| Travel range in Y | 100 µm | 100 µm | |
| Travel range in X, open loop, at -20 to 120 V | 110 µm | 110 µm | +20 / -0 % |
| Travel range in Y, open loop, at -20 to +120 V | 110 µm | 110 µm | +20 / -0 % |
| Linearity error in X | 0.03 % | 0.03 % | typ. |
| Linearity error in Y | 0.03 % | 0.03 % | typ. |
| Flatness (Linear crosstalk in Z with motion in X) | ± 5 nm | ± 5 nm | typ. |
| Flatness (Linear crosstalk in Z with motion in Y) | ± 5 nm | ± 5 nm | typ. |
| Pitch (Rotational crosstalk in θX with motion in Y) | ± 3 µrad | ± 3 µrad | typ. |
| Pitch (Rotational crosstalk in θY with motion in X) | ± 3 µrad | ± 3 µrad | typ. |
| Yaw (Rotational crosstalk in θZ with motion in X) | ± 10 µrad | ± 10 µrad | typ. |
| Yaw (Rotational crosstalk in θZ with motion in Y) | ± 10 µrad | ± 10 µrad | typ. |
| Positioning | P-734.2CD | P-734.2CL | Tolerance |
| Integrated sensor | Capacitive, direct position measuring | Capacitive, direct position measuring | |
| System resolution in X | 0.3 nm | 0.3 nm | |
| System resolution in Y | 0.3 nm | 0.3 nm | |
| Resolution in X, open loop | 0.2 nm | 0.2 nm | typ. |
| Resolution in Y, open loop | 0.2 nm | 0.2 nm | typ. |
| Drive Properties | P-734.2CD | P-734.2CL | Tolerance |
| Drive type | PICMA® | PICMA® | |
| Electrical capacitance in X | 6.2 µF | 6.2 µF | ±20 % |
| Electrical capacitance in Y | 6.2 µF | 6.2 µF | ±20 % |
| Mechanical Properties | P-734.2CD | P-734.2CL | Tolerance |
| Guide | Flexure guide with lever amplification | Flexure guide with lever amplification | |
| Stiffness in X | 3 N/µm | 3 N/µm | ±20 % |
| Stiffness in Y | 3 N/µm | 3 N/µm | ±20 % |
| Resonant frequency in X, unloaded | 500 Hz | 500 Hz | ±20 % |
| Resonant frequency in X, under load with 200 g | 350 Hz | 350 Hz | ±20 % |
| Resonant frequency in X, under load with 500 g | 250 Hz | 250 Hz | ±20 % |
| Resonant frequency in Y, unloaded | 500 Hz | 500 Hz | ±20 % |
| Resonant frequency in Y, under load with 200 g | 350 Hz | 350 Hz | ±20 % |
| Resonant frequency in Y, under load with 500 g | 250 Hz | 250 Hz | ±20 % |
| Permissible push force in X | 300 N | 300 N | max. |
| Permissible push force in Y | 300 N | 300 N | max. |
| Permissible push force in Z | 20 N | 20 N | max. |
| Permissible pull force in X | 100 N | 100 N | max. |
| Permissible pull force in Y | 100 N | 100 N | max. |
| Overall mass | 1040 g | 1040 g | ±5 % |
| Material | Aluminum | Aluminum | |
| Miscellaneous | P-734.2CD | P-734.2CL | Tolerance |
| Operating temperature range | -20 to 80 °C | -20 to 80 °C | |
| Connector | D-sub 25W3 (m) | LEMO LVPZT | |
| Cable length | 1.5 m | 1.5 m | |
| Recommended controllers / drivers | E-712, E-727 | E-500, E-503, E-505, E-509 | |
| Sensor connector | LEMO for capacitive sensors |