Noncontact optical encoders measure the position directly at the platform with the greatest accuracy. Nonlinearity, mechanical play or elastic deformation have no influence on the measurement.
Several piezo actuators perform a walking motion in the PiezoWalk® walking drive that leads to forward feed of a runner. Control of the actuators allows the smallest step and forward feed motion at a resolution of well under one nanometer.
Thanks to support of MATLAB and NI LabVIEW as well as all common operating systems (Windows, Linux, and macOS), integration succeeds in virtually every environment – quickly and efficiently. Sophisticated programming examples and software tools such as PIMikroMove shorten the time to productive operation considerably.
ND72Z2LAQ | Unit | Tolerance | |
|---|---|---|---|
PIFOC objective scanning system 2000 µm | |||
Active axes | Z | ||
Motion and positioning | |||
Integrated sensor | Optical linear encoder | ||
Travel range, closed loop | 2000 | µm | |
Min. incremental motion, closed-loop | 5 | nm | typ. |
Mechanical properties | |||
Step-and-settle time for a 3 µm step at 200 g payload, 100 nm settling band | <20 | ms | |
Recommended load* | 700 | g | max. |
Drive properties | |||
Piezo ceramic | NEXACT® | ||
Miscellaneous | |||
Operating temperature range | 15 to 40 | °C | |
Material | Aluminum | ||
Mass | 290 | g | ±5 % |
Cable length | 1.5 | m | ±10 mm |
Piezo controller | E-861 digital servo (in the scope of delivery) | ||
Interface / communication | USB, RS-232 | ||
Connector (motor) | HD D-sub 15 | ||
Connector (sensor) | HD D-sub 15 | ||
I/O connector | 4× digital input (TTL, programmable) 4× digital output (TTL, programmable) | ||
Command set | PI General Command Set (GCS) | ||
User software | PIMikroMove | ||
Software drivers | NI LabVIEW driver, dynamic libraries for Windows and Linux. Supports MATLAB, MetaMorph, µManager | ||
Supported functions | Wave generator, data recorder, macro programming | ||
Controller dimensions | 160 mm × 96 mm × 33 mm |