Ürünler PI - Nanopositioning Piezo Flexure Stages PIFOC® Objective & PInano® Sample Scanners for Microscopy
P-726 PIFOC High-Load Focus Scanner
Highly Dynamic Focus Scanner with Long Travel Range for Heavy Objectives
  • Highly dynamic positioning and scanning for large objectives
  • Resonant frequency 1120 Hz; 560 Hz with 210 g objective mass
  • Typ. step-and-settle about 6 ms
  • Travel range 100 µm
  • Highest linearity, stability, and control dynamics due to direct-measuring capacitive sensors
  • Resolution 0.3 nm
  • Zero-play, high-precision flexure guide system for better focus stability

Application fields

  • Super-resolution microscopy
  • Light disk microscopy
  • Confocal microscopy
  • 3-D imaging
  • Screening
  • Interferometry
  • Measuring technology
  • Autofocus systems
  • Biotechnology
  • Semiconductor tests

Outstanding lifetime thanks to PICMA® piezo actuators

The patented PICMA® piezo actuators are all-ceramic insulated. This protects them against humidity and failure resulting from an increase in leakage current. PICMA® actuators offer an up to ten times longer lifetime than conventional polymer-insulated actuators. 100 billion cycles without a single failure are proven.

Subnanometer resolution with capacitive sensors

Capacitive sensors measure with subnanometer resolution without contacting. They guarantee excellent linearity of motion, long-term stability, and a bandwidth in the kHz range.

High guiding accuracy due to zero-play flexure guides

Flexure guides are free of maintenance, friction, and wear, and do not require lubrication. Their stiffness allows high load capacity and they are insensitive to shock and vibration. They work in a wide temperature range.

Automatic configuration and fast component exchange

Mechanics and controllers can be combined as required and exchanged quickly. All servo and linearization parameters are stored in the ID chip of the D-sub connector of the mechanics. The autocalibration function of the digital controllers uses this data each time the controller is switched on.

Maximum accuracy due to direct position measuring

Motion is measured directly at the motion platform without any influence from the drive or guide elements. This allows optimum repeatability, outstanding stability, and stiff, fast-responding control.

Motion P-726.1CD Tolerance
Active axes Z  
Travel range in Z 100 µm  
Travel range in Z, open loop 100 µm +20 / -0 %
Linearity error in Z 0.02 % typ.
Positioning P-726.1CD Tolerance
Integrated sensor Capacitive, direct position measuring  
System resolution in Z 0.4 nm  
Resolution in Z, open loop 0.3 nm typ.
Point repeatabilitiy in Z, 10% step, 1 sigma 3 nm  
Drive Properties P-726.1CD Tolerance
Drive type PICMA®  
Electrical capacitance in Z 6 µF ±20 %
Mechanical Properties P-726.1CD Tolerance
Guide Flexure guide with lever amplification  
Stiffness in Z 3.4 N/µm ±20 %
Resonant frequency in Z, unloaded 1120 Hz ±20 %
Resonant frequency in Z, under load with 210 g 560 Hz ±20 %
Resonant frequency in Z, under load with 310 g 480 Hz ±20 %
Mechanical interface M32 inner thread (can be adapted to all common threads using a QuickLock thread adapter)  
Permissible push force in Z 100 N max.
Permissible pull force in Z 50 N max.
Overall mass 575 g  
Material

Aluminum, steel

 
Miscellaneous P-726.1CD Tolerance
Connector D-sub 7W2 (m)  
Recommended controllers / drivers

E-505, E-621, E-625, E-709.1C1L, E-754

 
Cable length 1.5 m +50 / -0 mm
Operating temperature range -20 to 80 °C  
3D Modeller
3D Modeller
3-D-model P-726.1x
Versiyon / Tarih

zip - 38 KB
3D Modeller
3-D-model P-726.0x
Versiyon / Tarih

zip - 57 KB
Veri Sayfası
Veri Sayfası
Datasheet P-726.xx
Versiyon / Tarih
2020-02-20
pdf - 398 KB
Dokümantasyon
Dokümantasyon
Installation Instructions P726T0001
P-726.xx QuickLock Thread Adapters for P-726 PIFOC
Versiyon / Tarih
2020-02-20
pdf - 736 KB
P-726.1CD
PIFOC high-load focus scanner; 100 µm travel range; capacitive, direct position measuring; D-sub 7W2 (m); 1.5 m cable length
Geçmişin gücüyle geleceğe yön verin.
İletişim
Nano Dünya Mak. San. Tic. Ltd. Şti.
Parseller Mah. Gündoğan Sok. No:8/A
Ümraniye/İstanbul

02166140039
info@nanodunya.com.tr
Copyright © 2024 by Nano Dünya. Tüm Hakları Saklıdır
x
Teklif Listesi
Teklif listeniz şu anda boş.
x
Döküman Talebi
İndirme listeniz şu anda boş.
0 0 Whatsapp