The patented PICMA® piezo actuators are all-ceramic insulated. This protects them against humidity and failure resulting from an increase in leakage current. PICMA® actuators offer an up to ten times longer lifetime than conventional polymer-insulated actuators. 100 billion cycles without a single failure are proven.
Capacitive sensors measure with subnanometer resolution without contacting. They guarantee excellent linearity of motion, long-term stability, and a bandwidth in the kHz range.
Flexure guides are free of maintenance, friction, and wear, and do not require lubrication. Their stiffness allows high load capacity and they are insensitive to shock and vibration. They work in a wide temperature range.
Mechanics and controllers can be combined as required and exchanged quickly. All servo and linearization parameters are stored in the ID chip of the D-sub connector of the mechanics. The autocalibration function of the digital controllers uses this data each time the controller is switched on.
Motion is measured directly at the motion platform without any influence from the drive or guide elements. This allows optimum repeatability, outstanding stability, and stiff, fast-responding control.
| Motion | P-725.CDD | Tolerance |
|---|---|---|
| Active axes | Z | |
| Travel range in Z | 18 µm | |
| Travel range in Z, open loop | 18 µm | ±20 % |
| Linearity error in Z | 0.05 % | typ. |
| Flatness (Linear crosstalk in X with motion in Z) | 150 nm | typ. |
| Straightness (Linear crosstalk in Y with motion in Z) | 150 nm | typ. |
| Yaw (Rotational crosstalk in θX with motion in Z) | 2 µrad | typ. |
| Pitch (Rotational crosstalk in θY with motion in Z) | 2 µrad | typ. |
| Positioning | P-725.CDD | Tolerance |
| Bidirectional repeatability in Z | 3 nm | typ. |
| Resolution in Z, open loop | 0.2 nm | typ. |
| Integrated sensor | Capacitive, direct position measuring | |
| System resolution in Z | 0.2 nm | |
| Drive Properties | P-725.CDD | Tolerance |
| Drive type | PICMA® | |
| Electrical capacitance in Z | 3.1 µF | ±20 % |
| Mechanical Properties | P-725.CDD | Tolerance |
| Stiffness in Z | 1.5 N/µm | ±20 % |
| Resonant frequency in Z, unloaded | 1180 Hz | ±20 % |
| Resonant frequency in Z, under load with 200 g | 450 Hz | ±20 % |
| Permissible push force in Z | 100 N | max. |
| Permissible pull force in Z | 20 N | max. |
| Guide | Flexure guide with direct drive | |
| Overall mass | 210 g | |
| Material | Aluminum | |
| Miscellaneous | P-725.CDD | Tolerance |
| Operating temperature range | -20 to 80 °C | |
| ID chip | Yes | |
| Connector | D-sub 7W2 (m) | |
| Cable length | 1.5 m | |
| Recommended controllers / drivers | E-610, E-625, E-709.1C1L, E-754 |