Ürünler PI - Nanopositioning Piezo Flexure Stages PIFOC® Objective & PInano® Sample Scanners for Microscopy
P-725.xCDE2 PIFOC Focus Scanner for Microscope Objectives
Dynamic Scanning with Travel Ranges of 100 µm, 400 µm, or 800 µm
  • Travel range 100 µm, 400 µm, or 800 µm
  • Significantly faster response and longer lifetime than motorized drives
  • Fine positioning of objectives with sub-nm resolution
  • Direct position measuring with capacitive sensors: Highest linearity
  • Compatible with Metamorph® imaging software
  • Large clear aperture with Ø 29 mm

Application fields

  • Super-resolution microscopy
  • Light disk microscopy
  • Confocal microscopy
  • 2-photon microscopy
  • 3D imaging
  • Screening
  • Interferometry
  • Measuring technology
  • Autofocus systems
  • Biotechnology
  • Semiconductor inspection

Outstanding lifetime due to PICMA® piezo actuators

The patented PICMA® piezo actuators are all-ceramic insulated. This protects them against humidity and failure resulting from an increase in leakage current. PICMA® actuators offer an up to ten times longer lifetime than conventional polymer-insulated actuators. 100 billion cycles without a single failure are proven.

Subnanometer resolution with capacitive sensors

Capacitive sensors measure with subnanometer resolution without contacting. They guarantee excellent linearity of motion, long-term stability, and a bandwidth in the kHz range.

High guiding accuracy due to zero-play flexure guides

Flexure guides are free of maintenance, friction, and wear, and do not require lubrication. Their stiffness allows high load capacity and they are insensitive to shock and vibration. They work in a wide temperature range.

Motion P-725.1CDE2 P-725.4CDE2 P-725.8CDE2 Tolerance
Active axes Z Z Z  
Travel range in Z 100 µm 400 µm 800 µm +20 / -0 %
Travel range in Z, open loop 120 µm 420 µm 840 µm ±20 %
Linearity error in Z 0.01 % 0.01 % 0.02 %  
Yaw (Rotational crosstalk in θX with motion in Z) ± 10 µrad ± 10 µrad ± 50 µrad  
Pitch (Rotational crosstalk in θY with motion in Z) ± 10 µrad ± 45 µrad ± 50 µrad  
Positioning P-725.1CDE2 P-725.4CDE2 P-725.8CDE2 Tolerance
Minimum incremental motion in Z 1 nm 4 nm 5 nm  
Point repeatabilitiy, 10% step, 1 sigma 10 nm 10 nm 50 nm  
Integrated sensor Capacitive, direct position measuring Capacitive, direct position measuring Capacitive, direct position measuring  
Sensor noise, 1 sigma 0.2 nm 0.2 nm 0.8 nm  
Position noise in Z 0.1 nm 0.1 nm 0.4 nm max.
Settling time for 10% step in Z 14 ms 22 ms 39 ms ±10 %
Drive Properties P-725.1CDE2 P-725.4CDE2 P-725.8CDE2 Tolerance
Drive type PICMA® PICMA® PICMA®  
Electrical capacitance in Z 3.2 µF 6.4 µF 12.8 µF ±20 %
Mechanical Properties P-725.1CDE2 P-725.4CDE2 P-725.8CDE2 Tolerance
Stiffness in Z 0.5 N/µm 0.25 N/µm 0.07 N/µm ±20 %
Resonant frequency in Z, unloaded 680 Hz 400 Hz 230 Hz ±20 %
Resonant frequency in Z, under load with 150 g 290 Hz 175 Hz 110 Hz ±20 %
Permissible push force in Z 100 N 100 N 100 N max.
Permissible pull force in Z 20 N 20 N 20 N max.
Guide Flexure guide with lever amplification Flexure guide with lever amplification Flexure guide with lever amplification  
Overall mass 280 g 280 g 350 g ±5 %
Material

Stainless steel, aluminum

Stainless steel, aluminum

Stainless steel, aluminum

 
Objective diameter 39 mm 39 mm 39 mm max.
Miscellaneous P-725.1CDE2 P-725.4CDE2 P-725.8CDE2 Tolerance
Operating temperature range 10 to 70 °C 10 to 70 °C 10 to 70 °C  
Connector D-sub 7W2 (m) D-sub 7W2 (m) D-sub 7W2 (m)  
Cable length 1.5 m 1.5 m 1.5 m +50 / -0 mm
Recommended controllers / drivers

E-709.1C1L - economic choice, suitable for most use cases;

E-754.1CD - high performance choice for highest precision

E-709.1C1L - economic choice, suitable for most use cases;

E-754.1CD - high performance choice for highest precision

E-709.1C1L - economic choice, suitable for most use cases;

E-754.1CD - high performance choice for highest precision

 
3D Modeller
3D Modeller
P-725.xCDE2 3-D model
Versiyon / Tarih
2021-06-24
zip - 2 MB
Veri Sayfası
Veri Sayfası
Datasheet P-725.xCDE2
Versiyon / Tarih
2023-05-16
pdf - 2 MB
Dokümantasyon
Dokümantasyon
Short Instructions PZ240
Piezo Positioning Systems: P-5xx / P-6xx / P-7xx
Versiyon / Tarih
6.1.0 10/2019
pdf - 1 MB
Dokümantasyon
User Manual P725UM0001
P-725.xCDE2 PIFOC Focus Scanners for Microscope Objectives
Versiyon / Tarih
2022-04-01
pdf - 1 MB
Dokümantasyon
Installation Instructions P725UM0002
Thread Adapters for P-725.xCDE2 PIFOC Focus Scanners
Versiyon / Tarih
2022-04-01
pdf - 746 KB
Broşürler
Broşürler
P-725 PIFOC® Portfolio
Piezobased Objective Focus Drive Series
Versiyon / Tarih
BRO77E 2021-06-21
pdf - 1 MB
P-725.1CDE2
PIFOC focus scanner for microscope objectives, high precision, fast step-and-settle, 100 µm, capacitive sensors, D-sub connector
P-725.4CDE2
PIFOC focus scanner for microscope objectives, high precision, fast step-and-settle, 400 µm, capacitive sensors, D-sub connector
P-725.8CDE2
PIFOC focus scanner for microscope objectives, high precision, fast step-and-settle, 800 µm, capacitive sensors, D-sub connector
Geçmişin gücüyle geleceğe yön verin.
İletişim
Nano Dünya Mak. San. Tic. Ltd. Şti.
Parseller Mah. Gündoğan Sok. No:8/A
Ümraniye/İstanbul

02166140039
info@nanodunya.com.tr
Copyright © 2024 by Nano Dünya. Tüm Hakları Saklıdır
x
Teklif Listesi
Teklif listeniz şu anda boş.
x
Döküman Talebi
İndirme listeniz şu anda boş.
0 0 Whatsapp