Ürünler - Nano Dünya

RS-40 V7 Compact Rotation Stage Suitable for Vacuum

Precision Positioning

Vacuum compatible up to 10^-7 hPa
Unlimited travel range
Repeatability to 87 µrad
20 mm Ø aperture
Reference switch

Direction of the axes and torques for rotation stages

RS-40 rotation stage, dimensions in mm. Note that a comma is used in the drawings instead of a decimal point.

Ürün Bilgileri Bilgiler Özellikler İndirmeler Taklif İste

Standard-class rotation stage

Worm drive. Aperture with 20 mm Ø. Reference switch.

Reduced outgassing especially for use in vacuum environments

Most notably, for the lubrication of the guides and the spindle a material with particularly low outgassing is used. This allows a bakeout temperature of up to 80° C.

Higher quality for applications in high vacuum

In this case, special components suitable for high vacuum are used, such as motor, measuring system, and limit switches. In addition, the surface is made of uncoated aluminum and the spindles and guides are made of stainless steel. With this, the PI V7 vacuum class is reached, which means up to 10^-7 hPa.

Drive

Stepper motor with gearhead.

Application fields

Vacuum chambers. Research. Beamline instrumentation. Microscopy. Electronics assembly and inspection.

Motion	3216V21000	Tolerance
Active axes	θZ
Rotation range in θZ	360 °
Maximum angular velocity in θZ, unloaded	20 °/s
Linear crosstalk in X with motion in θZ	± 5 µm	typ.
Linear crosstalk in Y with motion in θZ	± 5 µm	typ.
Linear crosstalk in Z with motion in θZ	± 5 µm	typ.
Rotational crosstalk in θX with motion in θZ	± 35 µrad	typ.
Rotational crosstalk in θY with motion in θZ	± 35 µrad	typ.
Positioning	3216V21000	Tolerance
Unidirectional repeatability in θZ	87 µrad	typ.
Bidirectional repeatability in θZ	± 700 µrad	typ.
Minimum incremental motion in θZ	87 µrad	typ.
Reference switch	Hall effect, N/C contact, 3.8 V to 24 V, NPN
Drive Properties	3216V21000	Tolerance
Drive type	2-phase stepper motor
Motor resolution	200 Full steps/rev.
Nominal voltage	24 V
Peak voltage	48 V
Drive torque clockwise in θZ	0.2 N·m	max.
Drive torque counterclockwise in θZ	0.2 N·m	max.
Mechanical Properties	3216V21000	Tolerance
Bearing type	Ball bearings
Worm gear reduction	90 : 1
Holding torque in θZ, passive	0.2 N·m
Moved mass in X, unloaded	90 g
Moment of inertia in θZ, unloaded	15.5 kg·mm²	±20 %
Permissible push force in Y	5 N	max.
Permissible push force in Z	20 N	max.
Permissible torque in θx	2 N·m	max.
Permissible torque in θY	2 N·m	max.
Overall mass	400 g
Material	Aluminum, stainless steel, red bronze
Miscellaneous	3216V21000	Tolerance
Operating temperature range	5 to 40 °C
Connector	D-sub 15-pole (f)
Cable length	2 m
Recommended controllers / drivers	C-663.12 C-885 with C-663.12C885 ACS modular controller
Vacuum class	10⁻⁷ hPa

Note on cable length: Fixed cable, firmly attached to the product

3D Modeller

3-D model RS-40 V7

Versiyon / Tarih

2020-03-30
,zip - 4 MB,

Listeye Ekle Listeden Çıkar

Veri Sayfası

Datasheet RS-40 V

Versiyon / Tarih

2023-01-30
,pdf - 413 KB,

İndir

Dokümantasyon

Short Instructions MP146EK

Positioners with Electric Motors: DT-xx / HPS-170 / L-xxx / LS-xxx / MTS-65 / PRS-xxx / RS-40 / UPL-120 / VT-80 / WT-xx / WT-xxx

Versiyon / Tarih

2.0.0 01/2020
,,,,,pdf - 736 KB,,,,,

İndir

Dokümantasyon

User Manual RS-40

Compact Rotation Stage

Versiyon / Tarih

2022-05-03
,pdf - 655 KB,

Listeye Ekle Listeden Çıkar

3216V21000

Vacuum-compatible compact rotation stage; 2-phase stepper motor; 360 ° rotational angle; 10 N load capacity; 20 °/s maximum angular velocity; vacuum compatible to 10⁻⁷ hPa; 2 m cable length

Teklif Listesine Ekle Teklif Listesinden Çıkar

İlgili Ürünler