The directly driven flat rotation stages of the PIglide RLA series are designed for the highest precision. They have a low profile and a large clear aperture. The RLA stages offer a superior travel accuracy, flatness, and wobble performance.
Absolute encoders supply explicit position information that enables immediate determination of the position. This means that referencing is not required during switch-on, which increases efficiency and safety during operation.
Tomography, beamline systems, wafer metrology, wafer inspection, measuring technology, inspection systems, calibration, scanning.
Thanks to the friction-free motion, no particles are formed, which makes PIglide stages ideal for cleanroom applications.
Motion | A-688 | Unit | Tolerance |
|---|---|---|---|
Travel range | Unlimited, > 360° | ||
Motion platform diameter | 365 | mm | |
Eccentricity (1) | 300 | nm | Max. |
Flatness (1) | 175 | nm | Max. |
Wobble (1) | 1 | μrad | Max. |
Mechanical properties | A-688 | Unit | Tolerance |
|---|---|---|---|
Load capacity, axial (2) | 770 | N | Max. |
Load capacity, radial (2) | 190 | N | Max. |
Load torque, MX,Y(2) | 36 | Nm | Max. |
Moment of inertia | 284710 | kg·mm² | Typ. |
Moved mass | 12 | kg | Typ. |
Overall mass | 24 | kg | Typ. |
Guide type | Air Bearing |
Drive properties | A-688 | Unit | Tolerance |
|---|---|---|---|
Drive type | Torque motor, 3-phase, brushless | ||
Intermediate circuit voltage | 48, nominal 80, max. | V DC | |
Peak current | 6.9 | A | Max. |
Nominal current | 3.2 | A | Max. |
Peak torque | 85 | Nm | Max. |
Nominal torque | 39 | Nm | Max. |
Torque constant | 12.3 | Nm/A | Typ. |
Resistance phase-phase | 3.6 | Ω | Typ. |
Inductance phase-phase | 1.24 | mH | Typ. |
Back EMF phase-phase | 10.1 | V/kRPM | Typ. |
Positioning | A-688.A100 | A-688.B100 |
|---|---|---|
Integrated sensor | Incremental angle-measuring system | Absolute angle-measuring system |
Sensor signal | Sin/cos, 1 V peak-peak | BiSS-C |
Lines/revolution | 55040 | – |
Velocity (3) | 500 rpm max. | 500 rpm max. |
Sensor resolution | 0.03 µrad (4) | 0.0015 µrad |
Bidirectional repeatability | ± 4 µrad | ± 4 µrad |
Accuracy, with error compensation (5) | ± 8 µrad | ± 8 µrad |
Reference switch | 1 / revolution, differential pulse over one sensor signal period, 1 V peak-peak | – |
Miscellaneous | A-688 |
|---|---|
Operating pressure (6) | 75 to 85 psi (515 to 585 kPa) |
Air consumption | < 2 SCFM (56 SLPM) |
Air quality | Clean (filtered to 1.0 μm or better) - ISO 8573‑1 Class 1 Oil free - ISO 8573‑1 Class 1 Dry (-15 °C dew point) - ISO 8573‑1 Class 3 |
Materials | Hardcoat aluminum, stainless steel mounting hardware |
(1) Dependent on the quality of the underlying surface, the payload, orientation, and forces that act on the stage from the outside. Please contact PI for application-specific parameters. The specified values are static (no rotary motion during measuring) and without load.
(2)The loads listed assume a supply pressure of 550 kPa (80 psi). Please contact PI if other pressures are required.
(3)May be limited by the payload, payload imbalance, controller or drive.
(4) Assumes 4096x interpolation. Contact PI for the use of other factors.
(5) The specified values are based on error compensation controlled by the controller. The stage must be ordered with an A-8xx series controller from PI to reach these values. Accuracy values assume short duration and do not consider the long-term effects of thermal drift on the stage.
(6) To protect the stage against damage, it is recommended to connect an air pressure sensor to the Motion-Stop input of the controller.