Recirculating ball bearing guides and precision threaded spindle for smooth and even feed. Stress-relieved aluminum base for high stability. Mechanical limit switches.
XY combinations of VT-80 linear stages are possible without an adapter. The compact XY variant with 25 mm travel range per axis is available for both motor types as factory option (preassembled at the factory):
All other travel range variants can be combined to XY combinations by the customer.
Note that the specifications for XY combinations can differ from the specifications of the single axes.
When carefully assembled, recirculating ball bearing guides are distinguished by a beneficial combination of high load capacity, lifetime, maintenance-free operation, and guiding accuracy. The moving part of the stages is supported by four preloaded recirculating ball bearing units, which run on two guide rails. Each bearing unit is made up of two independent rows of circulating ball bearings.
Positioning tasks with low duty cycle in industry and research.
| Motion | 62309110-0000 | 62309120 | 62309130 | 62309140 | 62309150 | 62309160 | 62309180 | 62309210-0000 | 62309220 | 62309230 | 62309240 | 62309250-0000 | 62309260 | 62309280 | Tolerance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Active axes | X | X | X | X | X | X | X | X | X | X | X | X | X | X | |
| Travel range in X | 25 mm | 50 mm | 75 mm | 100 mm | 150 mm | 200 mm | 300 mm | 25 mm | 50 mm | 75 mm | 100 mm | 150 mm | 200 mm | 300 mm | |
| Maximum velocity in X, unloaded | 20 mm/s | 20 mm/s | 20 mm/s | 20 mm/s | 20 mm/s | 20 mm/s | 20 mm/s | 20 mm/s | 20 mm/s | 20 mm/s | 20 mm/s | 20 mm/s | 20 mm/s | 20 mm/s | |
| Straightness (Linear crosstalk in Y with motion in X) | ± 8 µm | ± 10 µm | ± 11 µm | ± 12 µm | ± 14 µm | ± 20 µm | ± 35 µm | ± 8 µm | ± 10 µm | ± 11 µm | ± 12 µm | ± 14 µm | ± 20 µm | ± 35 µm | typ. |
| Flatness (Linear crosstalk in Z with motion in X) | ± 8 µm | ± 10 µm | ± 11 µm | ± 12 µm | ± 14 µm | ± 20 µm | ± 35 µm | ± 8 µm | ± 10 µm | ± 11 µm | ± 12 µm | ± 14 µm | ± 20 µm | ± 35 µm | typ. |
| Pitch (Rotational crosstalk in θY with motion in X) | ± 100 µrad | ± 110 µrad | ± 120 µrad | ± 130 µrad | ± 150 µrad | ± 170 µrad | ± 210 µrad | ± 100 µrad | ± 110 µrad | ± 120 µrad | ± 130 µrad | ± 150 µrad | ± 170 µrad | ± 210 µrad | typ. |
| Yaw (Rotational crosstalk in θZ with motion in X) | ± 150 µrad | ± 150 µrad | ± 150 µrad | ± 150 µrad | ± 150 µrad | ± 170 µrad | ± 210 µrad | ± 150 µrad | ± 150 µrad | ± 150 µrad | ± 150 µrad | ± 150 µrad | ± 170 µrad | ± 210 µrad | typ. |
| Positioning | 62309110-0000 | 62309120 | 62309130 | 62309140 | 62309150 | 62309160 | 62309180 | 62309210-0000 | 62309220 | 62309230 | 62309240 | 62309250-0000 | 62309260 | 62309280 | Tolerance |
| Unidirectional repeatability in X | 0.8 µm | 0.8 µm | 0.8 µm | 0.8 µm | 0.8 µm | 0.8 µm | 0.8 µm | 0.8 µm | 0.8 µm | 0.8 µm | 0.8 µm | 0.8 µm | 0.8 µm | 0.8 µm | typ. |
| Bidirectional repeatability in X | ± 10 µm | ± 10 µm | ± 10 µm | ± 10 µm | ± 10 µm | ± 10 µm | ± 10 µm | ± 10 µm | ± 10 µm | ± 10 µm | ± 10 µm | ± 10 µm | ± 10 µm | ± 10 µm | typ. |
| Minimum incremental motion in X | 0.5 µm | 0.5 µm | 0.5 µm | 0.5 µm | 0.5 µm | 0.5 µm | 0.5 µm | 0.2 µm | 0.2 µm | 0.2 µm | 0.2 µm | 0.2 µm | 0.2 µm | 0.2 µm | typ. |
| Limit switches | Mechanical, N/C contact, to 30 V, NPN | Mechanical, N/C contact, to 30 V, NPN | Mechanical, N/C contact, to 30 V, NPN | Mechanical, N/C contact, to 30 V, NPN | Mechanical, N/C contact, to 30 V, NPN | Mechanical, N/C contact, to 30 V, NPN | Mechanical, N/C contact, to 30 V, NPN | Mechanical, N/C contact, to 30 V, NPN | Mechanical, N/C contact, to 30 V, NPN | Mechanical, N/C contact, to 30 V, NPN | Mechanical, N/C contact, to 30 V, NPN | Mechanical, N/C contact, to 30 V, NPN | Mechanical, N/C contact, to 30 V, NPN | Mechanical, N/C contact, to 30 V, NPN | |
| Motor encoder | Incremental rotary encoder | Incremental rotary encoder | Incremental rotary encoder | Incremental rotary encoder | Incremental rotary encoder | Incremental rotary encoder | Incremental rotary encoder | ||||||||
| Resolution, motor encoder | 2000 Cts./rev. | 2000 Cts./rev. | 2000 Cts./rev. | 2000 Cts./rev. | 2000 Cts./rev. | 2000 Cts./rev. | 2000 Cts./rev. | ||||||||
| Motor encoder: Sensor signal | A/B quadrature, RS-422 | A/B quadrature, RS-422 | A/B quadrature, RS-422 | A/B quadrature, RS-422 | A/B quadrature, RS-422 | A/B quadrature, RS-422 | A/B quadrature, RS-422 | ||||||||
| Drive Properties | 62309110-0000 | 62309120 | 62309130 | 62309140 | 62309150 | 62309160 | 62309180 | 62309210-0000 | 62309220 | 62309230 | 62309240 | 62309250-0000 | 62309260 | 62309280 | Tolerance |
| Drive type | DC motor | DC motor | DC motor | DC motor | DC motor | DC motor | DC motor | 2-phase stepper motor | 2-phase stepper motor | 2-phase stepper motor | 2-phase stepper motor | 2-phase stepper motor | 2-phase stepper motor | 2-phase stepper motor | |
| Nominal voltage | 24 V | 24 V | 24 V | 24 V | 24 V | 24 V | 24 V | ||||||||
| Nominal current, RMS | 0.98 A | 0.98 A | 0.98 A | 0.98 A | 0.98 A | 0.98 A | 0.98 A | 1.7 A | 1.7 A | 1.7 A | 1.7 A | 1.7 A | 1.7 A | 1.7 A | typ. |
| Drive force in negative direction of motion in X | 40 N | 40 N | 40 N | 40 N | 40 N | 40 N | 40 N | 40 N | 40 N | 40 N | 40 N | 40 N | 40 N | 40 N | typ. |
| Drive force in positive direction of motion in X | 40 N | 40 N | 40 N | 40 N | 40 N | 40 N | 40 N | 40 N | 40 N | 40 N | 40 N | 40 N | 40 N | 40 N | typ. |
| Resistance phase-phase | 5.78 Ω | 5.78 Ω | 5.78 Ω | 5.78 Ω | 5.78 Ω | 5.78 Ω | 5.78 Ω | 1.7 Ω | 1.7 Ω | 1.7 Ω | 1.7 Ω | 1.7 Ω | 1.7 Ω | 1.7 Ω | typ. |
| Inductance phase-phase | 0.55 mH | 0.55 mH | 0.55 mH | 0.55 mH | 0.55 mH | 0.55 mH | 0.55 mH | 3.3 mH | 3.3 mH | 3.3 mH | 3.3 mH | 3.3 mH | 3.3 mH | 3.3 mH | |
| Motor resolution | 200 Full steps/rev. | 200 Full steps/rev. | 200 Full steps/rev. | 200 Full steps/rev. | 200 Full steps/rev. | 200 Full steps/rev. | 200 Full steps/rev. | ||||||||
| Mechanical Properties | 62309110-0000 | 62309120 | 62309130 | 62309140 | 62309150 | 62309160 | 62309180 | 62309210-0000 | 62309220 | 62309230 | 62309240 | 62309250-0000 | 62309260 | 62309280 | Tolerance |
| Guide | Recirculating ball bearing guide | Recirculating ball bearing guide | Recirculating ball bearing guide | Recirculating ball bearing guide | Recirculating ball bearing guide | Recirculating ball bearing guide | Recirculating ball bearing guide | Recirculating ball bearing guide | Recirculating ball bearing guide | Recirculating ball bearing guide | Recirculating ball bearing guide | Recirculating ball bearing guide | Recirculating ball bearing guide | Recirculating ball bearing guide | |
| Drive screw type | Metric leadscrew | Metric leadscrew | Metric leadscrew | Metric leadscrew | Metric leadscrew | Metric leadscrew | Metric leadscrew | Metric leadscrew | Metric leadscrew | Metric leadscrew | Metric leadscrew | Metric leadscrew | Metric leadscrew | Metric leadscrew | |
| Drive screw pitch | 1 mm | 1 mm | 1 mm | 1 mm | 1 mm | 1 mm | 1 mm | 1 mm | 1 mm | 1 mm | 1 mm | 1 mm | 1 mm | 1 mm | |
| Holding force in X, passive | 40 N | 40 N | 40 N | 40 N | 40 N | 40 N | 40 N | 40 N | 40 N | 40 N | 40 N | 40 N | 40 N | 40 N | |
| Moved mass in X, unloaded | 130 g | 140 g | 140 g | 150 g | 150 g | 150 g | 150 g | 160 g | 160 g | 170 g | 170 g | 170 g | 180 g | 180 g | |
| Permissible push force in Y | 30 N | 30 N | 30 N | 30 N | 30 N | 30 N | 30 N | 30 N | 30 N | 30 N | 30 N | 30 N | 30 N | 30 N | max. |
| Permissible push force in Z | 50 N | 50 N | 50 N | 50 N | 50 N | 50 N | 50 N | 50 N | 50 N | 50 N | 50 N | 50 N | 50 N | 50 N | max. |
| Permissible torque in θx | 5 N·m | 5 N·m | 5 N·m | 5 N·m | 5 N·m | 5 N·m | 5 N·m | 5 N·m | 5 N·m | 5 N·m | 5 N·m | 5 N·m | 5 N·m | 5 N·m | max. |
| Permissible torque in θY | 2.5 N·m | 2.5 N·m | 2.5 N·m | 2.5 N·m | 2.5 N·m | 2.5 N·m | 2.5 N·m | 2.5 N·m | 2.5 N·m | 2.5 N·m | 2.5 N·m | 2.5 N·m | 2.5 N·m | 2.5 N·m | max. |
| Permissible torque in θZ | 2.5 N·m | 2.5 N·m | 2.5 N·m | 2.5 N·m | 2.5 N·m | 2.5 N·m | 2.5 N·m | 2.5 N·m | 2.5 N·m | 2.5 N·m | 2.5 N·m | 2.5 N·m | 2.5 N·m | 2.5 N·m | max. |
| Overall mass | 550 g | 650 g | 700 g | 750 g | 850 g | 950 g | 1250 g | 550 g | 650 g | 700 g | 750 g | 850 g | 950 g | 1250 g | |
| Material | Anodized aluminum | Anodized aluminum | Anodized aluminum | Anodized aluminum | Anodized aluminum | Anodized aluminum | Anodized aluminum | Anodized aluminum | Anodized aluminum | Anodized aluminum | Anodized aluminum | Anodized aluminum | Anodized aluminum | Anodized aluminum | |
| Miscellaneous | 62309110-0000 | 62309120 | 62309130 | 62309140 | 62309150 | 62309160 | 62309180 | 62309210-0000 | 62309220 | 62309230 | 62309240 | 62309250-0000 | 62309260 | 62309280 | Tolerance |
| Connector | HD D-sub 15-pin (m) | HD D-sub 15-pin (m) | HD D-sub 15-pin (m) | HD D-sub 15-pin (m) | HD D-sub 15-pin (m) | HD D-sub 15-pin (m) | HD D-sub 15-pin (m) | HD D-sub 15-pin (m) | HD D-sub 15-pin (m) | HD D-sub 15-pin (m) | HD D-sub 15-pin (m) | HD D-sub 15-pin (m) | HD D-sub 15-pin (m) | HD D-sub 15-pin (m) | |
| Recommended controllers / drivers | C-863 C-885 with C-863.20C885 C-884 ACS modular controller | C-863 C-885 with C-863.20C885 C-884 ACS modular controller | C-863 C-885 with C-863.20C885 C-884 ACS modular controller | C-863 C-885 with C-863.20C885 C-884 ACS modular controller | C-863 C-885 with C-863.20C885 C-884 ACS modular controller | C-863 C-885 with C-863.20C885 C-884 ACS modular controller | C-863 C-885 with C-863.20C885 C-884 ACS modular controller | C-663.12 C-885 with C-663.12C885 ACS modular controller | C-663.12 C-885 with C-663.12C885 ACS modular controller | C-663.12 C-885 with C-663.12C885 ACS modular controller | C-663.12 C-885 with C-663.12C885 ACS modular controller | C-663.12 C-885 with C-663.12C885 ACS modular controller | C-663.12 C-885 with C-663.12C885 ACS modular controller | C-663.12 C-885 with C-663.12C885 ACS modular controller | |
| Operating temperature range | 5 to 40 °C | 5 to 40 °C | 5 to 40 °C | 5 to 40 °C | 5 to 40 °C | 5 to 40 °C | 5 to 40 °C | 5 to 40 °C | 5 to 40 °C | 5 to 40 °C | 5 to 40 °C | 5 to 40 °C | 5 to 40 °C | 5 to 40 °C |