In order to guarantee long-term reliability and proper operation of air bearing modules, the air supply must be clean, dry, and oil free. Contamination in the air can cause a reduction in stiffness and load capacity as well as an increase in friction. Eventually, the bearing will be damaged and fail. To prevent such contamination, PI offers efficient and inexpensive air preparation modules that allow users to clean the air supply easily. These modules filter particles and remove oil according to ISO 8573-1 Class 1.
PI recommends the A-801 model when the air supply is not clean according to ISO 8573-1 Class 3 or if more than four air bearings need to be supplied with air.
If the air supply is clean and oil free according to ISO 8573-1 Class 3 and the system requires an air flow of less than 10 SCFM (300 SLPM), the smaller A-802 model is recommended. If the quality of the air supply is not known, the A-801 model is recommended.
The A-804 model is based either on the A-801 model or the A-802 model and is preconfigured with a multi-axis air distributor for 4 or 8 independently regulated pressure channels. Furthermore, the A-804 model is supplied fully assembled on a steel plate.
If the compressed air supply contains moisture (ISO 8573-1 Class 4 or higher, dew point higher than 0°C), PI recommends adding a dryer (desiccant or refrigeration type) to the air supply upstream of the air preparation kit.
A-801.100 A-801.200 | A-802.100 A-802.200 | A-804.13200 A-804.18200 | A-804.23200[T] A-804.28200[T] | A-805.28200[T] | |
|---|---|---|---|---|---|
Description | Air preparation kit, 4-stage | Air preparation kit, 2-stage | Air preparation kit on mounting plate, 4-stage, multi-channel | Air preparation kit on mounting plate, 2-stage, multi-channel A-804.2x200T: with compressed air storage tank | Air preparation kit on mounting plate, 2-stage, multi-channel, vacuum generation A-805.2x200T: with compressed air storage tank |
Air supply | A-801.100 A-801.200 | A-802.100 A-802.200 | A-804.13200 A-804.18200 | A-804.23200[T] A-804.28200[T] | A-805.28200[T] |
|---|---|---|---|---|---|
Maximum flow | 60 SCFM (1680 SLPM) | 10 SCFM (300 SLPM) | 60 SCFM (1680 SLPM) | 10 SCFM (300 SLPM) | 10 SCFM (300 SLPM) |
Required compressed air inlet quality (ISO 8573-1) | As desired | Class 3 or better | As desired | Class 3 or better | Class 3 or better |
Max inlet pressure | 150 psi (1035 kPa) | 150 psi (1035 kPa) | 150 psi (1035 kPa) | 150 psi (1035 kPa) | 150 psi (1035 kPa) |
Air outlets | 1 | 1 | A-804.13200: 4 A-804.18200: 8 | A-804.23200[T]: 4 A-804.28200[T]: 8 | 6 |
Compressed air outlet quality (ISO 8573-1) | Class 1 (oil and particles) | Class 1 (oil and particles) | Class 1 (oil and particles) | Class 1 (oil and particles) | Class 1 (oil and particles) |
Vacuum generation to max. | - | - | - | - | -88 kPa |
Vacuum outlets | - | - | - | - | 2 |
Miscellaneous | A-801.100 A-801.200 | A-802.100 A-802.200 | A-804.13200 A-804.18200 | A-804.23200[T] A-804.28200[T] | A-805.28200[T] |
|---|---|---|---|---|---|
Materials | Aluminum | Polycarbonate | Aluminum Mounting plate: Painted steel | Polycarbonate Mounting plate: Stainless steel | Polycarbonate Mounting plate: Stainless steel |
Mass | 4.2 kg | 0.7 kg | A-804.13200: 5.5 kg A-804.18200: 5.7 kg | A-804.23200: 1.8 kg A-804.23200T: 3 kg A-804.28200: 2 kg A-804.28200T: 3.2 kg | A-805.28200: 2.2 kg A-805.28200T: 3.4 kg |
Pressure switch | A-801.100: None A-801.200: N/O contact, adjustable threshold value | A-802.100: None A-802.200: N/O contact, adjustable threshold value | N/O contact, adjustable threshold value | N/O contact, adjustable threshold value | N/O contact, adjustable threshold value |
Compressed air storage tank | - | - | - | 0.75 l stainless steel | 0.75 l stainless steel |