Products PI - Controllers & Drivers Piezo Drivers for Open-Loop Operation of Piezo Actuators
E-619 High-Power Amplifier for Piezo Actuators
Modular System for Continuous Dynamic Applications
  • Peak power up to 1200 W
  • High currents to 10 A
  • Low power consumption due to integrated energy recovery
  • Bandwidth to 20 kHz for high dynamics applications
  • Overheat protection for piezo actuators with temperature sensor
  • Optional upgrade for control and digital interfaces

High-power amplifier for piezo actuators

High peak current, >5 A continuous current. High bandwidth for high dynamics. Suitable for PICMA® piezo actuators with special electrodes. Output voltage -30 to 130 V. Analog control. Evaluation of temperature sensor protects the piezo actuator against overheating

Optional servo controller upgrade

Optional control module for nanopositioning systems with integrated position sensors (SGS, capacitive). Optional interface module with wave generator, data recorder, digital interfaces (TCP/IP, USB, RS-232, SPI). Optional driver set for use with D/A converter boards from National Instruments and NI LabVIEW software

High degree of efficiency

Class-D switched amplifier with capacitor for energy recovery. Low influence of the application thanks to reduced heat dissipation

Application fields

Mechanical engineering: High dynamics placement, vibration absorber, noncircular grinding, valve control, materials testing, test equipment

High dynamics tip/tilt mirror applications

E-619.H, E-619.00

E-619.S

E-619.R1 / E-619.R3

Function

High-power amplifier module for PICMA® piezo actuators with special electrodes

Offset voltage source for tip/tilt platforms with PICMA® piezo actuators and special electrodes

Housing for E-619 amplifier modules

Channels

1

1

1 / 3

Amplifier

E-619.H / E-619.00

E-619.S

Input voltage range

-2 to 12 V

-

Output voltage

-30 to 130 V

100 V

Peak output power (<5 ms)

1200 W

1200 W

Average output power (>5 ms)

Equivalent to 800 VA reactive power

Equivalent to 800 VA reactive power

Peak current (<5 ms)

10 A

10 A

Average output current (>5 ms)

>5 A

>5 A

Current limitation

Short-circuit proof

Short-circuit proof

Voltage gain

10 ±0.1

-

Amplifier bandwidth, small signal

20 kHz / 3 kHz

-

Ripple, noise, 0 to 10 kHz

<2 mVrms
<20 mVpp

<2 mVrms
<20 mVpp

Capacitive base load (internal)

2 µF / 1 µF

2 µF

Recommended piezo load

>1 µF

>1 µF

Output impedance

0.1 Ω; 53 µH; 2 µF / 0.1 Ω; 1 mH; 1 µF

0.1 Ω; 53 µH; 2 µF

Amplifier resolution

<2 mV

<2 mV

Amplifier classification

Class D, switched

400 kHz / 100 kHz

Class D, switched

400 kHz

Input impedance

100 kΩ

-

Interfaces and operation

E-619.H, E-619.00

E-619.S

Piezo connection

LEMO EGG.1B.302.CLL, with safety cover

LEMO EGG.1B.302.CLL, with safety cover

Analog input

SMB

-

Temperature sensor (piezo actuator)

PT 1000; LEMO FFA.OS.303.CLAC32

Max. 150 °C, deactivation of the voltage output

-

Display and indicators

LEDs for Power, Temp Overflow

Power LED

DC offset setting

10-turn potentiometer, adds 0 to 10 V to the input voltage

-

Miscellaneous

E-619.H, E-619.00, E-619.S

E-619.R1 / E-619.R3

Operating voltage

Supply via E-619 housing

100 - 240 V~, 50 - 60 Hz

Max. power consumption, full load

<150 W

150 VA / 360 VA

Max. power consumption without load

20 W

30 VA / 80 VA

Operating temperature range

5 to 40 °C

5 to 40 °C

Mass

3.5 kg

10 kg / 18 kg

Dimensions

21 HP/3 U

236 × 132 × 296 mm (without handles) /
450 x 132 x 296 mm (without handles)

Datasheet
Datasheet
Datasheet E-619
Version / Date
2023-11-20
pdf - 766 KB
Documentation
Documentation
Short Instruction PZ300
Housed Analog Piezo Electronics E-4xx, E-5xx, E-6xx, E-8xx
Version / Date
1.1.0 04/2021
pdf - 1 MB
Documentation
User Manual PZ288
E-619 Modular High-Power Amplifier System for Dynamic Continuous Applications
Version / Date
2.0.0 2021-10-06
pdf - 1 MB
E-619.H
High-power piezo amplifier module, 1 channel, 20 kHz bandwidth, 1200 W peak output power, -30 to 130 V
E-619.00
High-power piezo amplifier module, 1 channel, 3 kHz bandwidth, 1200 W peak output power, -30 to 130 V
E-619.S
Offset voltage source for tip/tilt platforms, 1 channel, 1200 W peak output power, 100 V fixed voltage
E-619.R1
9.5" housing for E-619 high-power piezo amplifier module, 1 channel
E-619.R3
19" housing for E-619 high-power piezo amplifier module, 3 channels
Optional upgrades
E-509.C1A
Sensor / servo controller module, capacitive sensor, 1 channel
E-509.C2A
Sensor / servo controller module, capacitive sensors, 2 channels
E-509.C3A
Sensor / servo controller module, capacitive sensors, 3 channels
E-509.E03
PISeca modular evaluation electronics for single-electrode capacitive sensors, 3 channels
E-509.E3
PISeca Sensor / servo controller module for capacitive single-electrode sensors, 3 channels
E-509.S1
Sensor / servo controller module, strain gauge sensor, 1 channel
E-509.S3
Sensor / servo controller module, strain gauge sensors, 3 channels
E-518.I3
Interface module, 3 channels, TCP/IP, USB, and RS-232 interfaces
E-500.ACD
Driver set for use with NI LabVIEW software, for analog controllers
Direct the future with the power of the past.
Expertise
Markets Technologies
Contact
Nano Dünya Mak. San. Tic. Ltd. Şti.
Parseller Mah. Gündoğan Sok. No:8/A
Ümraniye/İstanbul

02166140039
info@nanodunya.com.tr
Copyright © 2024 by Nano Dünya. All rights reserved.
x
Quote List
Your quote list is currently empty.
x
Download Request
Your download list is currently empty.
0 0 Whatsapp