E-835.00 | |
|---|---|
Function | Power amplifier for DuraAct piezo patch transducers |
Channels | 1 |
Amplifier | E-835.00 |
|---|---|
Input voltage range | -4 to 10 V |
Output voltage | -100 to 250 V |
Peak power | 30 W (<15 ms) |
Average output power | 3 W |
Peak current | 120 mA (<15 ms) |
Average output current | 40 mA |
Current limitation | Short-circuit proof |
Voltage gain | 25 |
Amplifier bandwidth, small signal | 4.2 kHz (60 nF) |
Amplifier bandwidth, large signal | 4.2 kHz (unloaded); 500 Hz (60 nF) |
Ripple, noise, 20 MHz | 2 mVpp |
Output impedance | 33 Ω |
Amplifier resolution | <10 mV |
Input impedance | 100 kΩ |
Interfaces and operation | E-835.00 |
|---|---|
Piezo voltage | Soldering points |
Analog input | Soldering points |
Voltage monitor | Soldering point, 1:100 |
Miscellaneous | E-835.00 |
|---|---|
Operating temperature range | 5 to 50 °C (above 40 °C, power derated) |
Overheat protection | Deactivation at 100 °C |
Dimensions | 87 mm × 50 mm × 21 mm |
Mass | 67 g |
Operating voltage | 12 V / 1.7 A 5.5 mm - barrel connector |
Max. power consumption | 20 W |