Capacitive sensors measure with subnanometer resolution without contacting. They guarantee excellent linearity of motion, long-term stability, and a bandwidth in the kHz range.
Mechanics and controllers can be combined as required and exchanged quickly. All servo and linearization parameters are stored in the ID chip of the D-sub connector of the mechanics. The autocalibration function of the digital controllers uses this data each time the controller is switched on.
All components used in the piezo systems are excellently suited for use in vacuum. No lubricant or grease is necessary for operating. Polymer-free piezo systems allow particularly low outgas rates.
The patented PICMA® piezo actuators are all-ceramic insulated. This protects them against humidity and failure resulting from an increase in leakage current. PICMA® actuators offer an up to ten times longer lifetime than conventional polymer-insulated actuators. 100 billion cycles without a single failure are proven.
Flexure guides are free of maintenance, friction, and wear, and do not require lubrication. Their stiffness allows high load capacity and they are insensitive to shock and vibration. They are 100 % vacuum compatible and work in a wide temperature range.
All degrees of freedom are measured against a single fixed reference. Undesired crosstalk between axes can be actively compensated (active guiding) in real time (depending on the bandwidth). High tracking accuracy is achieved in the nanometer range even in dynamic operation.
P-562.6CD | Unit | Tolerance | |
|---|---|---|---|
Active axes | X, Y, Z, θX, θY, θZ | ||
Motion and positioning | |||
Integrated sensor | Capacitive | ||
Travel range in X, Y, Z, closed loop | 200 | µm | |
Tip/tilt angle in θX, θY, θZ, closed loop | ±0.5 | mrad | |
Resolution in X, Y, Z, closed loop | 1 | nm | typ. |
Resolution in θX, θY, θZ, closed loop | 0.1 | µrad | typ. |
Linearity error in X, Y, Z | 0.01 | % | typ. |
Linearity error θX, θY, θZ | 0.1 | % | typ. |
Repeatability in X / Y / Z | ±2 / ±2 / ±3 | nm | typ. |
Repeatability θX / θY / θZ | ±0.1 / ±0.1 / ±0.15 | µrad | typ. |
Flatness | <15 | nm | typ. |
Mechanical properties | |||
Resonant frequency in X / Y / Z, no load | 110 / 110 / 190 | Hz | ±20 % |
Load capacity* | 5 | kg | max. |
Drive properties | |||
Ceramic type | PICMA® | ||
Electrical capacitance in X / Y / Z | 7.4 / 7.4 / 14.8 | µF | ±20 % |
Miscellaneous | |||
ID chip functionality | Yes | ||
Operating temperature range | -20 to 80 | °C | |
Material | Aluminum | ||
Mass | 1.45 | kg | ±5 % |
Cable length | 1.5 | m | ±10 mm |
Sensor/voltage connection | 2 × D-sub 25W3 (m) | ||
Recommended electronics | E-712 |