Products PI - Controllers & Drivers Nanopositioning Piezo Controllers
E-727.xF Digital Multi-Channel Piezo Controller with EtherCAT
Control Piezo Nanopositioning Systems via Fieldbus Interface
  • Integration into an automation system thanks to EtherCAT
  • Operating modes: CSP, PP, homing
  • Cycle time 1 ms
  • 20 kHz sampling rate control
  • Autoloading of calibration data from stage ID chip for interchangeability of controller and mechanics
  • 4th order polynomial linearization for mechanics and electronics

Digital controller for piezo-based nanopositioning systems

Integrated low-noise power amplifiers for PICMA® piezo actuators. Output voltage -30 to +130 V. Supports strain gauge sensors, capacitive sensors or piezoresistive sensors. Delivery includes wide input range power supply and USB cable.

Operation via TCP/IP or USB

Operation via TCP/IP or USB is possible without EtherCAT master. The controller then has the same functionality as an E-727 without fieldbus interface and is commanded via PI GCS. Extensive software support, e.g., for NI LabVIEW, dynamic libraries for Windows and Linux.

Further interfaces

SPI for fast serial transmission of position values to / from an SPI master. 4 analog inputs and outputs each (optional) for external sensors, target values or external amplifiers. 4 digital inputs and outputs respectively.

EtherCAT fieldbus interface

Controller and nanopositioning system behave like an intelligent multi-axis drive according to CiA402 drive profile. Can be integrated seamlessly into automation systems in industry and research. Operating modes according to IEC 61800-7-201: Cyclic Synchronous Position (CSP), Profile Position (PP) and Homing (manufacturer-specific method: Autozero). Cycle time 1 ms.

Extensive functionality

P-I controller with 2 notch filters. Linearization based on 4th-order polynomials. Optional Dynamic Digital Linearization (DDL). ID chip for fast startup and quick exchange of system components.

Digital controller for piezo-based nanopositioning systems

Integrated low-noise power amplifiers for PICMA® piezo actuators. Output voltage -30 to +130 V. Supports strain gauge sensors, capacitive sensors or piezoresistive sensors. Delivery includes wide input range power supply and USB cable.

Operation via TCP/IP or USB

Operation via TCP/IP or USB is possible without EtherCAT master. The controller then has the same functionality as an E-727 without fieldbus interface and is commanded via PI GCS. Extensive software support, e.g., for NI LabVIEW, dynamic libraries for Windows and Linux.

Further interfaces

SPI for fast serial transmission of position values to / from an SPI master. 4 analog inputs and outputs each (optional) for external sensors, target values or external amplifiers. 4 digital inputs and outputs respectively.

EtherCAT fieldbus interface

Controller and nanopositioning system behave like an intelligent multi-axis drive according to CiA402 drive profile. Can be integrated seamlessly into automation systems in industry and research. Operating modes according to IEC 61800-7-201: Cyclic Synchronous Position (CSP), Profile Position (PP) and Homing (manufacturer-specific method: Autozero). Cycle time 1 ms.

Extensive functionality

P-I controller with 2 notch filters. Linearization based on 4th-order polynomials. Optional Dynamic Digital Linearization (DDL). ID chip for fast startup and quick exchange of system components.

Datasheet
Datasheet
Datasheet E-727.xF
Version / Date
2022-12-08
pdf - 893 KB
Documentation
Documentation
Short Instructions PZ289
Digital Piezo Controllers E-709.xxG / E-727 / E-754
Version / Date
2.0.0 06/2020
pdf - 2 MB
Documentation
Technical Note A000T0074
Guide to Grounding and Shielding
Version / Date
2018-11-22
pdf - 120 KB
Documentation
User Manual E727T0005
Guide to Grounding and Shielding
Version / Date
2018-11-22
pdf - 120 KB
Documentation
Commands Manual PZ281
GCS Commands for E-727 Digital Multi-Channel Piezo Controller
Version / Date
1.3.0 2022-06-29
pdf - 1 MB
General Software Dokumentation
General Software Dokumentation
User Manual A000T0028
Updating PI Software with PIUpdateFinder
Version / Date
2020-05-20
pdf - 482 KB
General Software Dokumentation
Software Manual SM146
GCS Array Data Format
Version / Date
1.2.1
pdf - 153 KB
General Software Dokumentation
Software Manual SM148
PIMikroMove
Version / Date
2.14.1 2022-02-28
pdf - 4 MB
General Software Dokumentation
Software Manual SM151E
PI GCS2 DLL
Version / Date
2.10.0 2019-08-26
pdf - 1 MB
General Software Dokumentation
Software Manual SM155
PI MATLAB Driver GCS 2.0
Version / Date
1.2.0 2019-03-22
pdf - 1 MB
General Software Dokumentation
Software Manual SM157
PIPython - Programming PI Controllers with Python
Version / Date
2021-08-17
pdf - 866 KB
General Software Dokumentation
Technical Note A000T0089
PI Software on ARM-Based Platforms
Version / Date
2023-05-08
pdf - 276 KB
General Software Dokumentation
Software Manual SM159
PIFRF-Analyzer
Version / Date
2021-09-07
pdf - 923 KB
General Software Dokumentation
User Manual A000T0071
Implementing a PI Controller in TwinCAT 3.1 for a Single-Axis Motion
Version / Date
2020-02-24
pdf - 1 MB
Software File
Software File
PI Software Suite C-990.CD1
Version / Date
2.6.1.0, 2023-08
zip - 645 MB
Software File
C-990.CD1 Releasenews
Version / Date
2.6.1.0, 2023-08
pdf - 311 KB
E-727.3CDF
Digital multi-channel piezo controller, 3 axes, -30 to 130 V, capacitive sensors, D-sub 25W3 socket, EtherCAT interface
E-727.3CDAF
Digital multi-channel piezo controller, 3 axes, -30 to 130 V, capacitive sensors, D-sub 25W3 socket, EtherCAT interface, analog inputs
E-727.3SDF
Digital multi-channel piezo controller, 3 axes, -30 to 130 V, strain gauge sensors, D-sub 37 socket, EtherCAT interface
E-727.3SDAF
Digital multi-channel piezo controller, 3 axes, -30 to 130 V, strain gauge sensors, D-sub 37 socket, EtherCAT interface, analog inputs
E-727.3RDF
Digital multi-channel piezo controller, 3 axes, -30 to 130 V, piezoresistive sensors, D-sub 37 socket, EtherCAT interface
E-727.3RDAF
Digital multi-channel piezo controller, 3 axes, -30 to 130 V, piezoresistive sensors, D-sub 37 socket, EtherCAT interface, analog inputs
Accessories
E-710.SCN
Firmware extension DDL (Dynamic Digital Linearization)
Direct the future with the power of the past.
Expertise
Markets Technologies
Contact
Nano Dünya Mak. San. Tic. Ltd. Şti.
Parseller Mah. Gündoğan Sok. No:8/A
Ümraniye/İstanbul

02166140039
info@nanodunya.com.tr
Copyright © 2024 by Nano Dünya. All rights reserved.
x
Quote List
Your quote list is currently empty.
x
Download Request
Your download list is currently empty.
0 0 Whatsapp