Products PI - Vacuum Linear, Rotation, Elevation Stages and Accessories
L-310 V6 Precision Z Stage Suitable for Vacuum
Can be Compactly Combined with Linear and Rotation Stages
  • Suitable for vacuum up to 10-6 hPa
  • Travel range 26 mm (1")
  • High-resolution encoder
  • Stepper motor
  • Zero-play ball screw
  • Load capacity to 5.5 kg

Precision-class Z stage

High guiding accuracy and stiffness due to ball screws and crossed roller guides. Stress-relieved aluminum base for high stability. 2-phase stepper motor for high torque even at low velocities and high resolution Noncontact limit and reference switches (Hall effect). Reference switch with direction sensing in the middle of the travel range. Integrated linear encoder, installed centrically.

Highly accurate position measuring with incremental linear encoder

Noncontact optical linear encoders measure the position directly at the platform with the greatest accuracy. Nonlinearity, mechanical play or elastic deformation have no influence on the measurement.

Reduced outgassing especially for use in vacuum environments

Most notably, for the lubrication of the guides and the drive screw a material with particularly low outgassing is used. This allows a bakeout temperature of up to 80° C. With this and other modifications of the PI V6 vacuum class, this positioner can be used up to 10-6 hPa.

Application fields

Vacuum chambers. Research. Beamline instrumentation. Microscopy. Electronics assembly and inspection.

Motion L-310.021211V6 Tolerance
Active axes Z  
Travel range in Z 26 mm  
Maximum velocity in Z, unloaded 7.5 mm/s  
Flatness (Linear crosstalk in X with motion in Z) ± 3 µm typ.
Straightness (Linear crosstalk in Y with motion in Z) ± 3 µm typ.
Yaw (Rotational crosstalk in θX with motion in Z) ± 150 µrad typ.
Pitch (Rotational crosstalk in θY with motion in Z) ± 150 µrad typ.
Positioning L-310.021211V6 Tolerance
Integrated sensor Incremental linear encoder  
Unidirectional repeatability in Z 0.1 µm typ.
Bidirectional repeatability in Z ± 0.2 µm typ.
Minimum incremental motion in Z 0.05 µm typ.
Sensor signal Sin/cos, 1 V peak-peak  
Sensor signal period 20 µm  
Reference switch Hall effect, N/C contact, 5 V, NPN  
Reference switch repeatability 2 µm  
Limit switches Hall effect, N/C contact, 5 V, NPN  
Drive Properties L-310.021211V6 Tolerance
Drive type 2-phase stepper motor  
Motor resolution 200 Full steps/rev.  
Nominal voltage 24 V  
Peak voltage 48 V  
Drive force in negative direction of motion in Z 55 N typ.
Drive force in positive direction of motion in Z 55 N typ.
Mechanical Properties L-310.021211V6 Tolerance
Guide Crossed roller guide  
Drive screw type Ball screw  
Drive screw pitch 1 mm  
Holding force in Z, passive 50 N  
Moved mass in Z, unloaded 900 g  
Permissible push force in X 100 N max.
Permissible push force in Y 50 N max.
Permissible push force in Z 55 N max.
Permissible torque in θx 40 N·m max.
Permissible torque in θY 80 N·m max.
Permissible torque in θZ 80 N·m max.
Overall mass 2600 g  
Material Anodized aluminum  
Miscellaneous L-310.021211V6 Tolerance
Connector HD D-sub 26-pin (m)  
Sensor connector D-sub 9-pin (m)  
Vacuum class 10⁻⁶ hPa  
Recommended controllers / drivers

C-663.12

C-885 with C-663.12C885

ACS modular controller

 
Operating temperature range 5 to 40 °C  
3D Models
3D Models
3-D model L-310.021211V6
Version / Date
2019-12-06
,zip - 3 MB,
Datasheet
Datasheet
Datasheet L-310-V
Version / Date
2022-05-25
pdf - 2 MB
Documentation
Documentation
Short Instructions MP146EK
Positioners with Electric Motors: DT-xx / HPS-170 / L-xxx / LS-xxx / MTS-65 / PRS-xxx / RS-40 / UPL-120 / VT-80 / WT-xx / WT-xxx
Version / Date
2.0.0 01/2020
,,,,,pdf - 736 KB,,,,,
Documentation
User Manual L310T0005
L-310.021211V6
Version / Date
2022-09-20
,pdf - 439 KB,
L-310.021211V6
Vacuum compatible precision Z stage; 2-phase stepper motor; 26 mm travel range; 55 N load capacity; 7.5 mm/s maximum velocity; ball screw; incremental linear encoder, 20 µm sensor signal period, sin/cos, 1 V peak-peak; vacuum compatible to 10-6 hPa
Direct the future with the power of the past.
Expertise
Markets Technologies
Contact
Nano Dünya Mak. San. Tic. Ltd. Şti.
Parseller Mah. Gündoğan Sok. No:8/A
Ümraniye/İstanbul

02166140039
info@nanodunya.com.tr
Copyright © 2024 by Nano Dünya. All rights reserved.
x
Quote List
Your quote list is currently empty.
x
Download Request
Your download list is currently empty.
0 0 Whatsapp