Products PI - Nanopositioning Piezo Flexure Stages XY Piezo Flexure Stages
P-734 XY Piezo Scanner
Highly Dynamic, Highest Travel Accuracy, with Aperture
  • Flatness 5 nm, ideal for surface analysis and scanning microscopy
  • Parallel kinematics for faster response times and higher multi-axis accuracy
  • Travel range 100 µm × 100 µm
  • Clear aperture 56 mm × 56 mm
  • Resolution of 0.3 nm due to capacitive position sensors

Application fields

  • Scanning microscopy
  • Confocal microscopy
  • Mask/wafer positioning
  • Surface measuring technology
  • Nanoimprinting
  • Micromanipulation
  • Image processing / stabilization
  • Nanopositioning with high flatness and straightness of motion

Outstanding lifetime thanks to PICMA® piezo actuators

The patented PICMA® piezo actuators are all-ceramic insulated. This protects them against humidity and failure resulting from an increase in leakage current. PICMA® actuators offer an up to ten times longer lifetime than conventional polymer-insulated actuators. 100 billion cycles without a single failure are proven.

Subnanometer resolution with capacitive sensors

Capacitive sensors measure with subnanometer resolution without contacting. They guarantee excellent linearity of motion, long-term stability, and a bandwidth in the kHz range.

High guiding accuracy due to zero-play flexure guides

Flexure guides are free of maintenance, friction, and wear, and do not require lubrication. Their stiffness allows high load capacity and they are insensitive to shock and vibration. They work in a wide temperature range.

Automatic configuration and fast component exchange

Mechanics and controllers can be combined as required and exchanged quickly. All servo and linearization parameters are stored in the ID chip of the D-sub connector of the mechanics. The autocalibration function of the digital controllers uses this data each time the controller is switched on.

Maximum accuracy due to direct position measuring

Motion is measured directly at the motion platform without any influence from the drive or guide elements. This allows optimum repeatability, outstanding stability, and stiff, fast-responding control.

High dynamics multi-axis operation due to parallel kinematics

In a parallel-kinematic multi-axis system, all actuators act on a common platform. The minimum mass inertia and the identical design of all axes allow fast, dynamic, and nevertheless precision motion.

Motion P-734.2CD P-734.2CL Tolerance
Active axes X Y X Y  
Travel range in X 100 µm 100 µm  
Travel range in Y 100 µm 100 µm  
Travel range in X, open loop, at -20 to 120 V 110 µm 110 µm +20 / -0 %
Travel range in Y, open loop, at -20 to +120 V 110 µm 110 µm +20 / -0 %
Linearity error in X 0.03 % 0.03 % typ.
Linearity error in Y 0.03 % 0.03 % typ.
Flatness (Linear crosstalk in Z with motion in X) ± 5 nm ± 5 nm typ.
Flatness (Linear crosstalk in Z with motion in Y) ± 5 nm ± 5 nm typ.
Pitch (Rotational crosstalk in θX with motion in Y) ± 3 µrad ± 3 µrad typ.
Pitch (Rotational crosstalk in θY with motion in X) ± 3 µrad ± 3 µrad typ.
Yaw (Rotational crosstalk in θZ with motion in X) ± 10 µrad ± 10 µrad typ.
Yaw (Rotational crosstalk in θZ with motion in Y) ± 10 µrad ± 10 µrad typ.
Positioning P-734.2CD P-734.2CL Tolerance
Integrated sensor Capacitive, direct position measuring Capacitive, direct position measuring  
System resolution in X 0.3 nm 0.3 nm  
System resolution in Y 0.3 nm 0.3 nm  
Resolution in X, open loop 0.2 nm 0.2 nm typ.
Resolution in Y, open loop 0.2 nm 0.2 nm typ.
Drive Properties P-734.2CD P-734.2CL Tolerance
Drive type PICMA® PICMA®  
Electrical capacitance in X 6.2 µF 6.2 µF ±20 %
Electrical capacitance in Y 6.2 µF 6.2 µF ±20 %
Mechanical Properties P-734.2CD P-734.2CL Tolerance
Guide Flexure guide with lever amplification Flexure guide with lever amplification  
Stiffness in X 3 N/µm 3 N/µm ±20 %
Stiffness in Y 3 N/µm 3 N/µm ±20 %
Resonant frequency in X, unloaded 500 Hz 500 Hz ±20 %
Resonant frequency in X, under load with 200 g 350 Hz 350 Hz ±20 %
Resonant frequency in X, under load with 500 g 250 Hz 250 Hz ±20 %
Resonant frequency in Y, unloaded 500 Hz 500 Hz ±20 %
Resonant frequency in Y, under load with 200 g 350 Hz 350 Hz ±20 %
Resonant frequency in Y, under load with 500 g 250 Hz 250 Hz ±20 %
Permissible push force in X 300 N 300 N max.
Permissible push force in Y 300 N 300 N max.
Permissible push force in Z 20 N 20 N max.
Permissible pull force in X 100 N 100 N max.
Permissible pull force in Y 100 N 100 N max.
Overall mass 1040 g 1040 g ±5 %
Material

Aluminum

Aluminum

 
Miscellaneous P-734.2CD P-734.2CL Tolerance
Operating temperature range -20 to 80 °C -20 to 80 °C  
Connector D-sub 25W3 (m) LEMO LVPZT  
Cable length 1.5 m 1.5 m  
Recommended controllers / drivers

E-712, E-727

E-500, E-503, E-505, E-509

 
Sensor connector   LEMO for capacitive sensors  
3D Models
3D Models
P-734 3-D model
Version / Date

zip - 1 MB
Datasheet
Datasheet
Datasheet P-734
Version / Date
2022-12-21
pdf - 644 KB
Documentation
Documentation
User Manual PZ103
P-733, P-734 Piezo Nanopositioning Systems with Capacitive Sensors
Version / Date
1.1.0 2020-10-26
pdf - 2 MB
Product Note
Product Note
Product Change Notification Piezo Actuator Driven Products
Version / Date
2021-04-19
pdf - 377 KB
P-734.2CD
XY piezo scanner; 100 µm × 100 µm travel range (X × Y); capacitive, direct position measuring; D-sub 25W3 (m); 1.5 m cable length
P-734.2CL
XY piezo scanner; 100 µm × 100 µm travel range (X × Y); capacitive, direct position measuring; LEMO LVPZT; 1.5 m cable length
Direct the future with the power of the past.
Expertise
Markets Technologies
Contact
Nano Dünya Mak. San. Tic. Ltd. Şti.
Parseller Mah. Gündoğan Sok. No:8/A
Ümraniye/İstanbul

02166140039
info@nanodunya.com.tr
Copyright © 2024 by Nano Dünya. All rights reserved.
x
Quote List
Your quote list is currently empty.
x
Download Request
Your download list is currently empty.
0 0 Whatsapp