Flexure guides are free of maintenance, friction, and wear, and do not require lubrication. Their stiffness allows high load capacity and they are insensitive to shock and vibration. They are 100 % vacuum compatible and work in a wide temperature range.
Flexure guides are free of maintenance, friction, and wear, and do not require lubrication. Their stiffness allows high load capacity and they are insensitive to shock and vibration. They are 100 % vacuum compatible and work in a wide temperature range.
S-335.2SH* | S-335.2SHM1** | S-335.2SHM2*** | Unit | Tolerance | |
|---|---|---|---|---|---|
Active axes | θX, θY | θX, θY | θX, θY | ||
Motion and positioning | |||||
Integrated sensor | SGS | SGS | SGS | ||
Tip / tilt angle, closed loop (static motion at 0 to 120 V) | ±17.5 | ±17.5 | ±17.5 | mrad | |
Resolution, open loop | 0.1 | 0.1 | 0.1 | µrad | typ. |
Resolution, closed loop | 1.0 | 1.0 | 1.0 | µrad | typ. |
Linearity error | 0.05 (unidirectional) | 0.05 (unidirectional) | 0.05 (unidirectional) | % | typ. |
Repeatability | 1 (bidirectional) | 1 (bidirectional) | 1 (bidirectional) | µrad | typ. |
Mechanical properties | |||||
Resonant frequency, no load | 2 | - | - | kHz | ±20 % |
Resonant frequency, under load, with Ø 12.5 mm × 3 mm quartz glass mirror | 1.6 | 1.6 | - | kHz | ±20 % |
Resonant frequency, under load, with Ø 25.4 mm × 4 mm quartz glass mirror | 0.7 | - | 0.7 | kHz | ±20 % |
Gap between the pivot point and platform surface | 3.3 | 3.3 | 3.3 | mm | ±0.25 mm |
Drive properties | |||||
Ceramic type | PICMA® P-885 | PICMA® P-885 | PICMA® P-885 | ||
Electrical capacitance per axis | 6.2 | 6.2 | 6.2 | µF | ±20 % |
Miscellaneous | |||||
Operating temperature range | -20 to 80 | -20 to 80 | -20 to 80 | °C | |
Material platform | Titanium | Titanium | Titanium | ||
Mass (with cable and connector) | 320 | 325 | 330 | g | ±5 % |
Cable length | 2 | 2 | 2 | m | +100 mm / -0 mm |
Sensor / voltage connection | D-sub 37 (m) | D-sub 37 (m) | D-sub 37 (m) | ||
Recommended electronics | E-727 | E-727 | E-727 |
* 2SH version without mirror
** 2SHM1 version with mirror Ø 12.5 mm
*** 2SHM2 version with mirror Ø 25.4 mm
The resolution of the system is limited only by the noise of the amplifier and the measuring technology because PI piezo nanopositioning systems are free of friction.
The specifications apply to 21 °C ±10 °C. The specifications can deviate outside of this range. If you have any questions, contact your PI representative.