Products PI - Hexapods Vacuum-Compatible Hexapods
H-811.I2V Vacuum-Compatible 6-Axis Miniature Hexapod
Fast, Compact, and Highly Precise
  • Travel ranges to ±17 mm / ±21°
  • Load capacity to 5 kg
  • Repeatability to ±0.06 µm
  • Velocity to 10 mm/s
  • Vacuum compatible to 10-6 hPa

Reference-class 6-axis positioning system

Parallel-kinematic design for six degrees of freedom, making it significantly more compact and stiff than serial-kinematic systems, higher dynamics, no moved cables: Higher reliability, reduced friction. suitable for vacuum environments to 10-6 hPa.

Brushless DC Motor (BLDC)

Brushless DC motors are particularly suitable for high rotational speeds. They can be controlled very accurately and ensure high precision. Because they dispense with sliding contacts, they run smoothly, are wear-free and therefore achieve a long lifetime.

PI Hexapod Simulation Tool

The simulation software simulates the limits of the workspace and load capacity of a hexapod. Therefore, even before purchasing, you can check whether a particular hexapod model can handle the loads, forces, and torques occurring in an application. For this purpose, the simulation tool takes the position and motion of the hexapod as well as the pivot point and several reference coordinate systems into account.

Application fields

Industry and research, micromanufacturing, medical technology, tool inspection.

Motion H-811.I2V Tolerance
Active axes X Y Z θX θY θZ  
Travel range in X ± 17 mm  
Travel range in Y ± 16 mm  
Travel range in Z ± 6.5 mm  
Rotation range in θX ± 10 °  
Rotation range in θY ± 10 °  
Rotation range in θZ ± 21 °  
Maximum velocity in X 10 mm/s  
Maximum velocity in Y 10 mm/s  
Maximum velocity in Z 10 mm/s  
Maximum angular velocity in θX 250 mrad/s  
Maximum angular velocity in θY 250 mrad/s  
Maximum angular velocity in θZ 250 mrad/s  
Typical velocity in X 5 mm/s  
Typical velocity in Y 5 mm/s  
Typical velocity in Z 5 mm/s  
Typical angular velocity in θX 120 mrad/s  
Typical angular velocity in θY 120 mrad/s  
Typical angular velocity in θZ 120 mrad/s  
Positioning H-811.I2V Tolerance
Unidirectional repeatability in X ± 0.15 µm typ.
Unidirectional repeatability in Y ± 0.15 µm typ.
Unidirectional repeatability in Z ± 0.06 µm typ.
Unidirectional repeatability in θX ± 2 µrad typ.
Unidirectional repeatability in θY ± 2 µrad typ.
Unidirectional repeatability in θZ ± 3 µrad typ.
Minimum incremental motion in X 0.2 µm typ.
Minimum incremental motion in Y 0.2 µm typ.
Minimum incremental motion in Z 0.08 µm typ.
Minimum incremental motion in θX 2.5 µrad typ.
Minimum incremental motion in θY 2.5 µrad typ.
Minimum incremental motion in θZ 5 µrad typ.
Backlash in X 0.2 µm typ.
Backlash in Y 0.2 µm typ.
Backlash in Z 0.06 µm typ.
Backlash in θX 2 µrad typ.
Backlash in θY 2 µrad typ.
Backlash in θZ 4 µrad typ.
Drive Properties H-811.I2V Tolerance
Drive type Brushless DC motor  
Mechanical Properties H-811.I2V Tolerance
Stiffness in X 0.7 N/µm  
Stiffness in Y 0.7 N/µm  
Stiffness in Z 8 N/µm  
Maximum holding force, base plate in any orientation 2.5 N  
Maximum holding force, base plate horizontal 15 N  
Overall mass 2.2 kg  
Material

Stainless steel, aluminum

 
Maximum load capacity, base plate in any orientation 2.5 kg  
Maximum load capacity, base plate horizontal 5 kg  
Miscellaneous H-811.I2V Tolerance
Operating temperature range 0 to 50 °C  
Connector for supply voltage LEMO  
Cable length 2 m  
Recommended controllers / drivers

C-887.5x

 
Connector for data transmission HD D-sub 78-pin (m)  
Vacuum class 10⁻⁶ hPa  
Maximum bake out temperature 80 °C  
Outer diameter power supply cable 4.7 mm  
Minimum bending radius for fixed installation, power supply 50 mm  
Outer diameter data transmission cable 6.6 mm  
Minimum bending radius for fixed installation, data transmission 70 mm  

Technical data specified at 22±3 °C.

The maximum travel ranges of the individual coordinates (X, Y, Z, θX, θY, θZ) are interdependent. The data for each axis shows its maximum travel range when all other axes are in the zero position of the nominal travel range and the default coordinate system is in use, or rather when the pivot point is set to 0,0,0.

For continuous operation in a vacuum, restrictions on operating parameters may be necessary due to heat generation.

The cables fixed to the H-811.I2V are not drag chain compatible.

Note on outer diameter data transmission cable: The data transmission connection consists of 2 cables that end in one connector. The specified diameter applies for each cable.

Air-side connecting cables are not included in the scope of delivery and must be ordered separately.

3D Models
3D Models
H-811.I2V 3D Model
Version / Date
2023-02-01
zip - 6 MB
Datasheet
Datasheet
Datasheet H-811.I2V
Version / Date
2023-02-01
pdf - 3 MB
Documentation
Documentation
Short Instructions MS247EK
Hexapod Systems: H-xxx Hexapod with C-887.5xx Controller
Version / Date
2.0.0 06/2020
pdf - 2 MB
Documentation
User Manual MS235
H-811.I2, H-811.I2V, H-811.F2, and H-811.S2 miniature hexapods
Version / Date
2.5.0 2023-02-23
pdf - 7 MB
Product Note
Product Note
Product Change Notification H-811.I2V
Version / Date
2020-06-08
pdf - 64 KB
Software File
Software File
Hexapod Simulation Tool
Version / Date
2022-01-26
zip - 18 MB
White Papers
White Papers
Industrial Safety Device for Hexapods
How to Connect a Safety Light Barrier to a Hexapod System
Version / Date
WP4025E 2020-02
pdf - 1 MB
H-811.I2V
Miniature hexapod microrobot, brushless DC motor, vacuum compatible to 10-6hPa, 5 kg load capacity, 10 mm/s velocity, cable set 2 m on the vacuum side, feedthroughs. Air-side connecting cables are not included in the scope of delivery and must be ordered separately.
Direct the future with the power of the past.
Expertise
Markets Technologies
Contact
Nano Dünya Mak. San. Tic. Ltd. Şti.
Parseller Mah. Gündoğan Sok. No:8/A
Ümraniye/İstanbul

02166140039
info@nanodunya.com.tr
Copyright © 2024 by Nano Dünya. All rights reserved.
x
Quote List
Your quote list is currently empty.
x
Download Request
Your download list is currently empty.
0 0 Whatsapp