Stepper mike with 2-phase stepper motor as powerful direct drive, or slim design version with gearhead motors.
Nonrotating tip for uniform motion prevents wobble, torque, and wear at the point of contact. Noncontact limit switches protect the mechanics. A direction-sensing reference switch supports automation applications. Integrated position indicator. Versions with direct drive include handwheel for manual adjustment.
In conjunction with the networkable C-663.12 Mercury Step single-channel controller, the linear actuators offer good performance at an economically attractive system price for single-axis and multi-axis configurations.
| Motion | M-228.10S | M-228.11S | M-229.25S | M-229.26S | Tolerance |
|---|---|---|---|---|---|
| Active axes | X | X | X | X | |
| Travel range in X | 10 mm | 10 mm | 25 mm | 25 mm | |
| Maximum velocity in X, unloaded | 1.5 mm/s | 4 mm/s | 1.5 mm/s | 4 mm/s | |
| Positioning | M-228.10S | M-228.11S | M-229.25S | M-229.26S | Tolerance |
| Minimum incremental motion in X | 1 µm | 1 µm | 1 µm | 1 µm | typ. |
| Unidirectional repeatability in X | ± 2 µm | ± 2 µm | ± 2 µm | ± 2 µm | typ. |
| Backlash in X | 5 µm | 10 µm | 10 µm | 10 µm | typ. |
| Reference switch | Hall effect | Hall effect | Hall effect | Hall effect | |
| Reference switch repeatability | 1 µm | 1 µm | 1 µm | 1 µm | |
| Limit switches | Hall effect | Hall effect | Hall effect | Hall effect | |
| Drive Properties | M-228.10S | M-228.11S | M-229.25S | M-229.26S | Tolerance |
| Drive type | 2-phase stepper motor with gearhead | 2-phase stepper motor | 2-phase stepper motor with gearhead | 2-phase stepper motor | |
| Operating voltage | 24 V | 24 V | 24 V | 24 V | |
| Nominal current, RMS | 0.25 A | 0.85 A | 1 A | 0.85 A | typ. |
| Motor resolution | 24 Full steps/rev. | 400 Full steps/rev. | 24 Full steps/rev. | 400 Full steps/rev. | |
| Drive force in X | 20 N | 50 N | 50 N | 80 N | typ. |
| Mechanical Properties | M-228.10S | M-228.11S | M-229.25S | M-229.26S | Tolerance |
| Drive screw type | Trapezoidal drive screw | Trapezoidal drive screw | Trapezoidal drive screw | Trapezoidal drive screw | |
| Drive screw pitch | 0.5 mm | 0.5 mm | 0.5 mm | 0.5 mm | |
| Gear ratio i | 256 : 9 | - | 256 : 9 | - | |
| Overall mass | 230 g | 360 g | 400 g | 610 g | |
| Material | Anodized aluminum,·chrome steel, brass | Anodized aluminum,·chrome steel, brass | Anodized aluminum,·chrome steel, brass | Anodized aluminum,·chrome steel, brass | |
| Miscellaneous | M-228.10S | M-228.11S | M-229.25S | M-229.26S | Tolerance |
| Operating temperature range | -20 to 65 °C | -20 to 65 °C | -20 to 65 °C | -20 to 65 °C | |
| Connector | D-sub 15-pin (m) | D-sub 15-pin (m) | D-sub 15-pin (m) | D-sub 15-pin (m) | |
| Cable length | 0.5 m | 0.6 m | 0.5 m | 0.6 m | |
| Recommended controllers / drivers | C-663.12 C-885 with C-663.12C885 | C-663.12 C-885 with C-663.12C885 | C-663.12 C-885 with C-663.12C885 | C-663.12 C-885 with C-663.12C885 |