Products PI - Nanopositioning Piezo Flexure Stages Linear Piezo Flexure Stages
P-752 High-Precision Nanopositioning Stage
Highly Dynamic and Stable Piezo Scanner with Extremely Accurate Guiding
  • Resolution 0.1 nm
  • Fast response behavior
  • Travel range up to 35 µm
  • Highest linearity due to capacitive sensors
  • Friction-free flexure guides for very high travel accuracy
  • Outstanding lifetime thanks to PICMA® piezo actuators

Application fields

  • Scanning microscopy
  • Measuring technology
  • Test procedures and quality assurance
  • Photonics
  • Fiber positioning

Outstanding lifetime due to PICMA® piezo actuators

The patented PICMA® piezo actuators are all-ceramic insulated. This protects them against humidity and failure resulting from an increase in leakage current. PICMA® actuators offer an up to ten times longer lifetime than conventional polymer-insulated actuators. 100 billion cycles without a single failure are proven.

Subnanometer resolution with capacitive sensors

Capacitive sensors measure with subnanometer resolution without contacting. They guarantee excellent linearity of motion, long-term stability, and a bandwidth in the kHz range.

High guiding accuracy due to zero-play flexure guides

Flexure guides are free of maintenance, friction, and wear, and do not require lubrication. Their stiffness allows high load capacity and they are insensitive to shock and vibration. They work in a wide temperature range.

Automatic configuration and fast component exchange

Mechanics and controllers can be can be combined as required and exchanged quickly. All servo and linearization parameters are stored in the ID chip of the mechanics' D-sub connector. The auto calibration function on the digital controller automatically uses this data every time the controller is switched on.

Maximum accuracy due to direct position measuring

Motion is measured directly at the motion platform without any influence from the drive or guide elements. This allows optimal repeatability, outstanding stability, and stiff, fast-responding control.

Motion P-752.11C P-752.1CD P-752.21C P-752.2CD Tolerance
Active axes X X X X  
Travel range in X 15 µm 15 µm 30 µm 30 µm  
Travel range in X, open loop, at -20 to 120 V 20 µm 20 µm 35 µm 35 µm +20 / -0 %
Linearity error in X 0.03 % 0.03 % 0.03 % 0.03 % typ.
Pitch (Rotational crosstalk in θY with motion in X) ± 1 µrad ± 1 µrad ± 1 µrad ± 1 µrad typ.
Yaw (Rotational crosstalk in θZ with motion in X) ± 1 µrad ± 1 µrad ± 1 µrad ± 1 µrad typ.
Positioning P-752.11C P-752.1CD P-752.21C P-752.2CD Tolerance
Integrated sensor Capacitive, direct position measuring Capacitive, direct position measuring Capacitive, direct position measuring Capacitive, direct position measuring  
System resolution in X 0.1 nm 0.1 nm 0.2 nm 0.2 nm  
Resolution in X, open loop 0.1 nm 0.1 nm 0.2 nm 0.2 nm typ.
Repeatability in X ± 1 nm ± 1 nm ± 2 nm ± 2 nm typ.
Drive Properties P-752.11C P-752.1CD P-752.21C P-752.2CD Tolerance
Drive type PICMA® PICMA® PICMA® PICMA®  
Electrical capacitance in X 2.1 µF 2.1 µF 3.7 µF 3.7 µF ±20 %
Mechanical Properties P-752.11C P-752.1CD P-752.21C P-752.2CD Tolerance
Guide Flexure guide with lever amplification Flexure guide with lever amplification Flexure guide with lever amplification Flexure guide with lever amplification  
Stiffness in X 30 N/µm 30 N/µm 20 N/µm 20 N/µm ±20 %
Resonant frequency in X, unloaded 3200 Hz 3200 Hz 2100 Hz 2100 Hz ±20 %
Resonant frequency in X, under load with 300 g 980 Hz 980 Hz 600 Hz 600 Hz ±20 %
Permissible push force in X 100 N 100 N 100 N 100 N max.
Permissible push force in Z 30 N 30 N 30 N 30 N max.
Permissible pull force in X 10 N 10 N 10 N 10 N max.
Overall mass 250 g 250 g 350 g 350 g ±5 %
Material

Steel

Steel

Steel

Steel

 
Miscellaneous P-752.11C P-752.1CD P-752.21C P-752.2CD Tolerance
Operating temperature range -20 to 80 °C -20 to 80 °C -20 to 80 °C -20 to 80 °C  
Connector LEMO FFS.00.250.CTCE24 D-sub 7W2 (m) LEMO FFS.00.250.CTCE24 D-sub 7W2 (m)  
Sensor connector LEMO FFA.00.250.CTLC31   LEMO FFA.00.250.CTLC31    
Cable length 1.5 m 1.5 m 1.5 m 1.5 m +50 / -0 mm
Recommended controllers / drivers

E-505, E-610, E-625, E-754

E-505, E-610, E-625, E-754

E-505, E-610, E-625, E-754

E-505, E-610, E-625, E-754

 
3D Models
3D Models
P-752 3-D model
Version / Date
2017-10-12
zip - 213 KB
Datasheet
Datasheet
Datasheet P-752
Version / Date
2023-03-07
pdf - 966 KB
Documentation
Documentation
Short Instructions PZ240
Piezo Positioning Systems: P-5xx / P-6xx / P-7xx
Version / Date
6.1.0 10/2019
pdf - 1 MB
Documentation
User Manual P752T0002
P-752 High Precision Nanopositioning Stage
Version / Date
2018-06-27
pdf - 785 KB
Product Note
Product Note
Product Change Notification Piezo Actuator Driven Products
Version / Date
2021-04-19
pdf - 377 KB
P-752.11C
High-precision nanopositioning stage; 15 µm travel range; capacitive, direct position measuring; LEMO connectors; 1.5 m cable length
P-752.1CD
High-precision nanopositioning stage; 15 µm travel range; capacitive, direct position measuring; D-sub 7W2 (m); 1.5 m cable length
P-752.21C
High-precision nanopositioning stage; 30 µm travel range; capacitive, direct position measuring; LEMO connectors; 1.5 m cable length
P-752.2CD
High-precision nanopositioning stage; 30 µm travel range; capacitive, direct position measuring; D-sub 7W2 (m); 1.5 m cable length
Direct the future with the power of the past.
Expertise
Markets Technologies
Contact
Nano Dünya Mak. San. Tic. Ltd. Şti.
Parseller Mah. Gündoğan Sok. No:8/A
Ümraniye/İstanbul

02166140039
info@nanodunya.com.tr
Copyright © 2024 by Nano Dünya. All rights reserved.
x
Quote List
Your quote list is currently empty.
x
Download Request
Your download list is currently empty.
0 0 Whatsapp