Products PI - XY Stages XY & XYZ Sample Stages for Microscopy
U-751.24 XY Stage with Piezomotors
Low-Profile and Fast, Direct Position Measurement
  • Compact design: Only 32 mm in height, no lead screw ducts or flanged motors
  • Direct-measuring linear encoder with 100 nm resolution
  • Self-locking, no heat generation at rest, no servo jitter
  • Clear aperture 78 mm × 78 mm (at maximum displacement 65 mm × 65 mm)
  • Noncontact limit and reference switches

Precision-class XY stage

PILine® stages are particularly suitable for applications that require fast precision positioning. When switched off, the self-locking drive holds the position of the stage mechanically stable. Energy consumption and heat generation are therefore considerably reduced. Applications with a low duty cycle that are battery-powered or heat-sensitive benefit from these characteristics. The position of the axis is measured by an encoder and an optical reference switch allows reliable repeatable motion. The piezomotor drive principle and its electrical operation are inexpensive and can be customized.

PILine® ultrasonic piezomotors

An integral part of a PILine® ultrasonic piezomotor is a piezo actuator that is preloaded against a movable, guided runner via a coupling element. The piezoceramic actuator is excited to ultrasonic oscillation by a high-frequency AC voltage between 100 and 200 kHz. Deformation of the actuator leads to periodic diagonal motion of the coupling element relative to the runner. The feed created is a few nanometers per cycle; the high frequencies lead to the high velocities. Preloading the piezoceramic actuator against the runner ensures self-locking of the drive when at rest and switched off.

Highly accurate position measuring with incremental linear encoder

Noncontact optical encoders measure the position directly at the platform with the greatest accuracy. Nonlinearity, mechanical play or elastic deformation have no influence on the measurement.

Crossed roller guide

With crossed roller guides, the point contact of the balls in ball guides is replaced by line contact of the hardened rollers. Consequently, they are considerably stiffer and need less preload, which reduces friction and allows smoother running. Crossed roller guides are also distinguished by high guiding accuracy and load capacity. Force-guided rolling element cages prevent cage creep.

Fields of application

Research and industry. For microscopy, biotechnology, laboratory automation. Special versions for standard light microscopes available on request.

Motion U-751.24 Tolerance
Active axes X Y  
Travel range in X 25 mm  
Travel range in Y 25 mm  
Maximum velocity in X 100 mm/s  
Maximum velocity in Y 100 mm/s  
Pitch (Rotational crosstalk in θX with motion in Y) ± 50 µrad typ.
Pitch (Rotational crosstalk in θY with motion in X) ± 50 µrad typ.
Roll (Rotational crosstalk in θY with motion in Y) ± 50 µrad typ.
Yaw (Rotational crosstalk in θZ with motion in X) ± 50 µrad typ.
Yaw (Rotational crosstalk in θZ with motion in Y) ± 50 µrad typ.
Positioning U-751.24 Tolerance
Integrated sensor Incremental linear encoder  
Bidirectional repeatability in X ± 0.3 µm typ.
Bidirectional repeatability in Y ± 0.3 µm typ.
Minimum incremental motion in X 0.075 µm typ.
Minimum incremental motion in Y 0.075 µm typ.
Sensor resolution 0.1 µm  
Reference switch Optical  
Limit switches Hall effect  
Drive Properties U-751.24 Tolerance
Drive type PILine® piezo motor, performance class 2  
Drive force in X 7 N typ.
Antriebskraft in X 7 N typ.
Mechanical Properties U-751.24 Tolerance
Guide Crossed roller guide  
Holding force in X, passive 6 N min.
Holding force in Y, passive 6 N min.
Permissible push force in Z 50 N max.
Overall mass 1800 g  
Material

Aluminum, black anodized

 
Miscellaneous U-751.24 Tolerance
Operating temperature range 0 to 40 °C  
Connector 2 × D-sub 15-pin (m)  
Cable length 1.5 m  
Recommended controllers / drivers

C-867.2U2, C-867.10C885

 

Permissible push force in Z: At max. velocity 10 N.

Ask about customized versions.

3D Models
3D Models
U-751 3-D model
Version / Date
2016-08-04
zip - 818 KB
Datasheet
Datasheet
Datasheet U-751.24
Version / Date
2023-02-06
pdf - 645 KB
Documentation
Documentation
Short Instructions MP121EK
PILine® Positioners: M-67x, M-68x, U-52x, U-62x, U-651, U-7xx
Version / Date
5.3.0 02/2023
pdf - 2 MB
Documentation
User Manual MP193
U-751 XY Stage
Version / Date
1.0.3 2022-01-03
pdf - 1 MB
U-751.24
PILine® XY stage; PILine® piezo motor, performance class 2; 25 mm × 25 mm travel range (X × Y); 50 N load capacity; 100 mm/s × 100 mm/s maximum velocity; incremental linear encoder, 0.1 µm sensor resolution; 1.5 m cable length
Direct the future with the power of the past.
Expertise
Markets Technologies
Contact
Nano Dünya Mak. San. Tic. Ltd. Şti.
Parseller Mah. Gündoğan Sok. No:8/A
Ümraniye/İstanbul

02166140039
info@nanodunya.com.tr
Copyright © 2024 by Nano Dünya. All rights reserved.
x
Quote List
Your quote list is currently empty.
x
Download Request
Your download list is currently empty.
0 0 Whatsapp