1 channel. Position control for capacitive or strain gauge sensors. RS-232 and USB computer interfaces, high-resolution 24-bit transducers. Low-noise amplifier for inputting and outputting peak currents of 120 mA in the low-voltage range.
E-621.SR / E-621.CR | |
|---|---|
Function | Power amplifier & piezo controller |
Sensor | E-621.SR / E-621.CR |
|---|---|
Controller type | P-I (analog) + notch filter |
Sensor type | SGS (.S) / capacitive (.C) |
Amplifier | E-621.SR / E-621.CR |
|---|---|
Input voltage range | -2 to +12 V |
Output voltage | -30 to +130 V |
Peak current, < 50 ms | 120 mA |
Average output current | 60 mA |
Current limitation | Short-circuit proof |
Noise, 0 to 100 kHz | 0.8 mVrms |
Voltage gain | 10 ±0.1 |
Input impedance | 100 kΩ |
Interfaces and operation | E-621.SR / E-621.CR |
|---|---|
Communication interfaces | USB, RS-232 (Sub-D 9 (m)), 24-bit A/D, 20-bit D/A |
Piezo connection | LEMO ERA.00.250.CTL (.SR) / Sub-D special (.CR) |
Sensor connection | LEMO EPL.0S.304.HLN (.SR) / Sub-D special (.CR) |
Analog input | SMB |
Sensor monitor output | SMB |
Controller network | up to 12 channels, parallel |
Command set | PI General Command Set (GCS) |
User software | PIMikroMove |
Software drivers | NI LabVIEW drivers, DLLs |
Supported functions | Wave table, 256 data points, external trigger, 16 macros |
DC offset setting | External potentiometer (not in the scope of delivery), adds 0 to 10 V to the input voltage |
Miscellaneous | E-621.SR / E-621.CR |
|---|---|
Operating temperature range | 5 °C to 50 °C (above 40 °C, power derated) |
Overheat protection | Deactivation at 75 °C |
Dimensions | 7 HP/3 RU |
Mass | 0.6 kg |
Operating voltage | 12 to 30 V DC, stabilized |
Max. current consumption | 2 A |
Ask about custom designs!