The E-651 is a benchtop device, especially designed for P-871 multilayer bending actuators equipped with strain gauge sensors. One- and two-channel versions are available. The compact E-614.2BS OEM board provides the same functionality as the 2-channel model.
The control signal specifies the piezo position in the servo loop. The servo controller is set so that maximum displacement is achieved at an input control voltage of +/- 5 V. The E-651 can also be operated as a pure voltage amplifier. The analog input signal in a range of -5 to +5 V then controls the output voltage ranging up to 60 V.
E-651.1S | E-651.2S / E-614.2BS | |
|---|---|---|
Function | Piezo amplifier and position controller for multilayer bending actuators, benchtop device | Piezo amplifier and position controller for multilayer bending actuators E-651.2S: benchtop device E-614.2BS: OEM module |
Channels | 1 | 2 |
Sensor | E-651.1S | E-651.2S / E-614.2BS |
|---|---|---|
Controller type | P-I (analog) | P-I (analog) |
Sensor type | SGS | SGS |
Sensor bandwidth | Low-pass filter frequency: 300 Hz / 1 kHz / 3 kHz selectable | Low-pass filter frequency: 300 Hz / 1 kHz / 3 kHz selectable |
Amplifier | E-651.1S | E-651.2S / E-614.2BS |
|---|---|---|
Input voltage range | -5 to 5 V | -5 to 5 V |
Min. output voltage | 0 to 60 V, additional fixed voltage of 60 V | 0 to 60 V, additional fixed voltage of 60 V |
Max. output power (<5 ms) | 1 W | 1 W / channel |
Average output power | 0.5 W | 0.5 W / channel |
Peak current (<5 ms) | 36 mA | 36 mA / channel |
Average output current | 18 mA | 18 mA / channel |
Current limitation | Short-circuit proof | Short-circuit proof |
Voltage gain | 6 | 6 |
Input impedance | 100 kΩ | 100 kΩ |
Interfaces and operation | E-651.1S | E-651.2S | E-614.2BS |
|---|---|---|---|
Piezo / sensor connector | LEMO EPG.0B.307.HLN | LEMO EPG.0B.307.HLN | Separate pin headers for piezo output and sensor |
Analog input / control input socket | BNC | BNC | Pin header |
Sensor monitor output | 0 to 10 V for nominal displacement | 0 to 10 V for nominal displacement | 0 to 10 V for nominal displacement |
Sensor monitor socket | BNC | BNC | Pin header |
Miscellaneous | E-651.1S | E-651.2S | E-614.2BS |
|---|---|---|---|
Operating temperature range | 5 to 50 °C | 5 to 50 °C | 5 to 50 °C |
Overheat protection | Deactivation at 75 °C | Deactivation at 75 °C | Deactivation at 75 °C |
Dimensions | 125 mm × 90 mm × 265 mm | 125 mm × 90 mm × 265 mm | 100 mm × 40 mm × 200 mm |
Mass | 1.36 kg | 1.45 kg | 0.3 kg |
Operating voltage | 14 to 16 V DC (power adapter in the scope of delivery) | 14 to 16 V DC (power adapter in the scope of delivery) | 14 to 16 V DC |